trying to update my PE 1850 BIOS' (PE1850_BIOS_LX_A07.BIN) from a Debian base
...
~ I haven't been able to achieve much. I basically forced libsmbiosxml1 on lenny. Given your experience, you may be able to see/figure out something out of my log. From: ~ ducea.com/2007/08/27/dell-bios-firmware-updates-on-debian/ ~ I learned that you must install: libsmbios-bin libsmbios1 libsmbiosxml1 ~ but they did it from a Debian etch base and there doesn't seem to be "libsmbiosxml1" in lenny ~ Thank you lbrtchx ~ // __ first let’s install packages from lenny ~ # dpkg –install libsmbios2_2.0.3.dfsg-1_i386.deb Selecting previously deselected package libsmbios2. (Reading database . . . 88338 files and directories currently installed.) Unpacking libsmbios2 (from libsmbios2_2.0.3.dfsg-1_i386.deb) . . . Setting up libsmbios2 (2.0.3.dfsg-1) . . . ~ # dpkg –install libsmbios-dev_2.0.3.dfsg-1_i386.deb Selecting previously deselected package libsmbios-dev. (Reading database . . . 88343 files and directories currently installed.) Unpacking libsmbios-dev (from libsmbios-dev_2.0.3.dfsg-1_i386.deb) . . . Setting up libsmbios-dev (2.0.3.dfsg-1) . . . ~ # dpkg –install libsmbios-bin_2.0.3.dfsg-1_i386.deb Selecting previously deselected package libsmbios-bin. (Reading database . . . 88392 files and directories currently installed.) Unpacking libsmbios-bin (from libsmbios-bin_2.0.3.dfsg-1_i386.deb) . . . Setting up libsmbios-bin (2.0.3.dfsg-1) . . . ~ // __ but then forcing on lenny . . . ~ # dpkg –force-all –install libsmbiosxml1_0.12.1-3_i386.deb (Reading database . . . 88419 files and directories currently installed.) Preparing to replace libsmbiosxml1 0.12.1-3 (using libsmbiosxml1_0.12.1-3_i386.deb) . . . Unpacking replacement libsmbiosxml1 . . . dpkg: libsmbiosxml1: dependency problems, but configuring anyway as you request: libsmbiosxml1 depends on libsmbios1 (= 0.12.1-3); however: Package libsmbios1 is not installed. Setting up libsmbiosxml1 (0.12.1-3) . . . ~ # dpkg -l | grep libsmbios ii libsmbios-bin 2.0.3.dfsg-1 Provide access to (SM)BIOS information — ut ii libsmbios-dev 2.0.3.dfsg-1 Provide access to (SM)BIOS information – dev ii libsmbios2 2.0.3.dfsg-1 Provide access to (SM)BIOS information — dy ii libsmbiosxml1 0.12.1-3 Provide XML access to (SM)BIOS information - ~ // __ gives you nothing ~ # ./PE1850_BIOS_LX_A07.BIN -c /tmp/PE1850_BIOS_LX_A07.BIN-4507-15036/spsetup.sh: line 124: source: buildVer.sh: file not found /tmp/PE1850_BIOS_LX_A07.BIN-4507-15036/spsetup.sh: line 1474: source: PIEConfig.sh: file not found Variable pkgReleaseId must be set by PIEConfig.sh /tmp/PE1850_BIOS_LX_A07.BIN-4507-15036/spsetup.sh: line 287: $_SUPPORT_LOG_FILE: ambiguous redirect /tmp/PE1850_BIOS_LX_A07.BIN-4507-15036/spsetup.sh: line 462: $_SUPPORT_LOG_FILE: ambiguous redirect /tmp/PE1850_BIOS_LX_A07.BIN-4507-15036/spsetup.sh: line 463: $_SUPPORT_LOG_FILE: ambiguous redirect
As a bios update will require a reboot anyway, have you considered just using a Linux Live CD (e.g. SuSE Desktop), putting the bin file on a USB key, mounting the USB key in the live OS and then try to flash from there?
> have you considered just using a Linux Live CD ... ? ~ this is what I have been doing all along. I use knoppix 6.2, based lenny and on kernel: ~ knoppix@Microknoppix:~$ uname -r 2.6.31.6 ~ with my USB micro drive ~ Is there a specific reason why you are suggesting to me to use SuSE? ~ The guys at ducea.com were able to easily do it using a live CD based on etch, but one of the needed libsmbios* libraries doesn't exist anymore in lenny, namely: libsmbiosxml* ~ Since many people out there are using live CDs for all kinds of things, I think DELL should also prepare their live CDs for those sorts of things ~ Thanks lbrtchx
I actually used an etch-based liveCD without any problems whatsoever (even if it was a Greek version of knoppix) I found here: ~ http://downloads.sourceforge.net/project/knoppel/knoppel/knoppel-08/knoppel-08.iso ~ and these very well written instructions ~ http://www.ducea.com/2007/08/27/dell-bios-firmware-updates-on-debian/ ~ Now if I could find similar instructions to update the ESM so that the fans are not so noisy! . . . :-) ~ Than you lbrtchx
Dev Mgr
6 Operator
•
9308 Posts
•
3 Points
576
0
Posted January 26th, 2010 07:00
As a bios update will require a reboot anyway, have you considered just using a Linux Live CD (e.g. SuSE Desktop), putting the bin file on a USB key, mounting the USB key in the live OS and then try to flash from there?