Arape

updated

2 years ago

A

Arape

1 Message

0

1364

January 7th, 2020 01:00

T410 server disk drive bay battery low

I have a server Dell T410. Yesterday the following message appeared on the front panel display:

disk drive bay battery low

 

Image:

battery.png

 

My question is do I need to replace it?

If I need to get new one can you link original DELL part? 

 

Do I need to do something before the replacement?

  • DELL-Charles R

    Moderator

    •

    4730 Posts

    •

    25476 Points

    0

    0

    Posted June 21st, 2024 18:22

    Hello,

     

    The PERC battery maintains the data in the PERC memory when powered off.

     

    If the battery fails then the PERC automatically goes into Write-Through mode.

    Typically the PERC is in Write-Back and data is passed to the PERC to write to disk.

    In Write-Through data is written direct to disk and is not held in memory.

     

    It typically would not fail the controller as it puts the controller in write-through regularly when it does battery relearn which it does every 90 days.

    DELL-Charles R

    Social Media and Communities Professional
    Dell Technologies | Enterprise Support Services
    #IWork4Dell

    Did I answer your query? Please click on ‘Accept as Solution’. ‘Thumbs up’ the posts you like!

  • Daniel My

    12 Elder

    •

    6204 Posts

    925

    0

    Posted January 7th, 2020 11:00

    That sounds like the PERC battery. The battery goes through learn cycles every 90 days by default. The battery will drain and then trickle charge when this happens. If it is going through a learn cycle or if power was disconnected from the system then a low battery status may be normal. I would give it ~8 hours to charge to see if the battery status goes to normal.

    I don't know if we sell the battery any longer. The PERC 5i, 6i, and H700 all use the same type of battery. I think we changed the battery after the H700. One of the part numbers for the battery is NU209.

  • Matheus Sossai

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted May 8th, 2024 22:15


    Hello,

    After replacing the battery, do I need to do anything for the server to recognize the new battery?
    I don't have "OpenManager Server Administrator" installed.

    Best regards,
    Matheus

    (edited)

  • DELL-Young E

    Moderator

    •

    5421 Posts

    •

    37 Points

    0

    0

    Posted May 10th, 2024 06:06

    Hello, a PERC battery probably needs charging with the server on.
    Respectfully,

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • xavierg1909

    1 Rookie

    •

    1 Message

    •

    2 Points

    0

    0

    Posted June 21st, 2024 17:04

    Hello, what is the function of this type of batteries? What is the symptom if the battery fails? Would the controller fail or is it optional?