jimxms

updated

6 years ago

J

jimxms

1 Message

0

114493

November 12th, 2013 23:00

R710 not showing BIOS ver and acting weird after update...

Hi All,

I recently inherited two R710's with the same specs. Both were quite behind on their BIOS and firmware updates (one was using 2.2.x the other 3.0.0) so I thought I would be a good idea to bring them up-to-date.

Using the Centos boot disk I flashed them both with the latest 6.4.0 BIOS BIN file. Both seemed to update fine, but following the update the server that was previously on BIOS ver 3.0.0 is now not showing any BIOS version at all!!

By that I mean that during POST the Dell screen says 'BIOS Version' and then nothing. Also if I go into the BIOS menu, no version is reported. Nor is it reported in any of the Dell utils / iDRAC.

The same server is also exhibiting some other BIOS related weirdness:

- it will no longer go into the F10 LC menu - it just freezes while loading.
- Sometimes the Dell BIOS boot splash screen is corrupted. All I see is a blue gradient that starts half way down the screen.
- In VMware ESXi VCenter the server Make/Model is not reported.

I tried to rectify these issues by clearing the CMOS - no joy. Flashing the 6.4.0 BIOS again - nope. I also upgraded all other firmware (RAID, iDRAC, NIC...etc) - no joy here either.

Finally I came across the Lifecycle Controller Repair Package. I flashed this using iDRAC and rebooted, It did nothing at all!!

So now I'm stuck. The system boots fine and will load an OS, but I'm feeling very uneasy about putting it into production. 

I've considered trying to flash BIOS 3.0.0 back onto the server, but I have no idea if you can downgrade the BIOS and have been afraid to try as even the BIOS flash tool does not seem to know what BIOS version I am currently on.

  • Ryan-at-xbyte

    1 Rookie

    •

    28 Posts

    5110

    0

    Posted May 22nd, 2014 13:00

    Possible solution from one of our engineers...

    He may want to try to force flash the new bios on from the dos utility on a usb key.  You just put the utility on a dos bootable usb, boot to that usb, run the utility, but instead of just running the command you run the command with a space “/forcetype” at the end of the command line.

  • DELL-Chris H

    7 Practitioner

    •

    9682 Posts

    •

    48046 Points

    5110

    0

    Posted November 13th, 2013 07:00

    Jimxms,

    Thats what I would suggest. I think the issue you are having is from jumping to many updates ahead. Backflash with their original versions and t hen walk the updates up. You can go here and select Previous Versions and find each update and walk the updates up to current.

    Let me know how it goes.

    DELL-Chris H

    Social Media and Communities Professional

    Dell Technologies | Enterprise Support Services

    #IWork4Dell

    Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!

  • Chrol

    1 Message

    5110

    0

    Posted April 9th, 2014 02:00

    I have the same issue - no revision shown and usc and inventory wont complete - otherwise seems like a fully functioning system.

    I tried backing several bios versions.

    Did you solve it?

    thanks

  • jscz

    2 Posts

    5110

    0

    Posted May 22nd, 2014 10:00

    Hi, did you solve this issue? I have exactly same problem after BIOS update.

  • jscz

    2 Posts

    5110

    0

    Posted May 23rd, 2014 01:00

    Flashing BIOS using dos utility with /forcetype works. BIOS was flashed succesfully and revision now shows up correctly at system startup and in setup. Also after this 'BIOS repair' USC started to boot properly (it hanged everytime at boot as it is described here http://commweb-ps3.us.dell.com/support-forums/servers/f/956/t/19315279.aspx ). Thank you.

  • Ryan-at-xbyte

    1 Rookie

    •

    28 Posts

    5110

    0

    Posted May 23rd, 2014 08:00

    You are very welcome.  I passed off your "Thank you" to our engineers who gave me the suggestion.  We (xbyte) build thousands of Dell servers every year and our engineers recognized the problem.

  • 3619

    0

    Posted September 18th, 2014 01:00

    Thanks a lot for the info,

    downgrading to version 2.2.0 with /forcetype worked fine.

    Then all i had to do was to upgrade to v3.0.0, 6.0.7, 6.1.0, 6.4.0

    i used CW1349A2.exe (Dell Optiplex 755) to create a bootable USB disk.

    Then copied all the BIOS versions on the USB key.

    regards,

    dennis

  • v.zervas

    1 Message

    4565

    0

    Posted May 30th, 2018 01:00

    We had the exact same issue with a PowerEdge R510 bios Version 1.13.0 (it was initially applied from within windows)

    /forcetype updating it from a bootable USB disk, resolved the issue for us as well.

    Thank you.

  • yokam

    1 Message

    4545

    0

    Posted May 30th, 2018 20:00

    Hi,

    this conversation really helps me resolve my R610 dell server update the bios.

    i have same problem encountered hanging up when booting up to LCC F10, and from bios boot up only the BIOS VERSION will appear.

    i suggest to see the real file name from the DIR of you disk when running the commands.

    i run the follwing cmd R610-0~1.exe /forcetype which is the filename from the directory, even the file should be R610-060500c.exe.

    thank for the help.

     

  • HectorPG

    1 Message

    1893

    0

    Posted May 22nd, 2020 11:00

    Which bootalbe image did you use? I tried freedos and that doesnt work because i cant run the .exe in there.