UNSOLVED

andrew.doades

updated

3 years ago

AD

andrew.doades

1 Rookie

•

1 Message

0

96188

July 7th, 2016 03:00

Poweredge R710 Memory Upgrade Configuration

Hi,

I've got a Poweredge R710 that currently has 32GB RAM installed via 8 x 4GB modules. I've just ordered a 32GB upgrade (2 x 16GB) from Crucial to bring the server up to 64GB in total, however no matter what configuration i put the modules in, the server just reports an invalid or non optimal configuration.

Can someone help me work out the correct configuation please?

Thanks,
Andrew

  • VanguardSam

    1 Message

    71684

    1

    Posted November 9th, 2016 14:00

    Have almost this exact situation.  I am am reading your answer properly Robert that it would be possible to use the following configuration:

    A1,B1,A2,B2 = 16 GB sticks

    A4,B4,A5,B5 = 4 GB sticks

    A7,B7,A8,B8 = 4 GB sticks

    Achieving a total of 96 GB of RAM?

  • sdconnors

    1 Message

    52996

    0

    Posted November 19th, 2017 15:00

    What about the remaining (6) 4Gb Sticks, in this case.

    Would it be OK to also add (2) of those to A7 &B7 = 4Mb each for a total of 48 Gb instead of just 40 Gb..!?

    So each Channel A1, B1 would be configured:   16Gb/4Gb/4Gb = 48Gb total

    Then, with (2) more 16Gb sticks (and the (4) 4Gb sticks)

    Channels A2, B2 would be configured to match A1, B1 for a total of 96 Gb

    Is this all correct, Robert (or Dell Support) - did you neglect to mention filling slots A7 and B7 with 4Gb sticks for a reason?

  • houlihas

    10 Posts

    79415

    0

    Posted March 21st, 2018 13:00

    This is incorrect.

    I have an R710 with A1-8GB A2-8GB A3-null and get no optimal configuration warning. 

    If I move the configuration to A2 and A3 and leave A1 empty, I get the optimal configuration warning. 

    There is more to the configuration that includes A1.

     

     

  • dropfreeze

    1 Rookie

    •

    4 Posts

    76119

    0

    Posted May 15th, 2018 08:00

    I currently have 6 - 16GB chips in the server located in slots A1, A2, A3 & B1, B2, B3. I need to add either 2 or 6 more sticks of 16GB to this mix. If I do this how should I spread out the RAM for best performance.

    Add 2 = A4, A7, A5, A8 & B4, B7, B5, B8 ?

    Add 6 = A4, A7, A5, A8, A6, A9 & B4, B7, B5, B8, B6, B9?

    Do I skip the 1,2 and 3 slots, in these configs?

    Any help would be appreciated, thanks!

  • 75779

    0

    Posted May 21st, 2018 14:00

    I am doing something similar. I am removing 8- 8GBs and wanting to add 12 - 16GB's, 1333MHz. I found this link below helpful, but I am still unsure if it lowers the speed by populating A4,5,6 and B4,5,6

     

    http://www.dell.com/downloads/global/products/pedge/en/server-pedge-installing-upgrading-memory-11g.pdf

  • cpostier

    1 Message

    51434

    0

    Posted June 28th, 2019 16:00

    Well, according the doc, I guess all the speeds loqwer to the lowest speed installed dimm

  • Stof95

    4 Posts

    43114

    0

    Posted December 3rd, 2019 07:00

    I'm also upgrading memory to but using 6 16G RDIMM only and removing all older memory in a dual CPU configuration.  Am I to understand from your diagram here that I should use:

    3 using slots A1, A2, A3

    and

    3 using slots B1, B2, B3?

    The boot up screen is giving me a suggested configuration which I tried to follow, but right now it says only 32GB is usable.

    I'm also realizing that a bios upgrade may be necessary to see the 16GB RDIMM?  Currently I'm at ver 6.1

     

    Thanks.

  • theflash1932

    11 Legend

    •

    16255 Posts

    34278

    0

    Posted December 3rd, 2019 09:00

    Just want to make sure of something ... are you seeing that only 32GB is usable in the OS? Or in the BIOS?

  • Stof95

    4 Posts

    34231

    0

    Posted December 8th, 2019 15:00

    In the OS. Computer property and also under task manager. Is this a limitation on 2008 R2 standard server?

    The BIOS is showing 96G.

  • vbg_foobar

    1 Message

    11951

    0

    Posted May 13th, 2021 16:00

    Thanks.. This worked for me.. Had 128 GB (16*8) placed as =>

    A1, A4, A2, A3

    B1, B4, B2, B3

    Upon bootup, the server showed only 96 GB.. Reconfigured as per your explanation to :

    A1, A4, A2, A5

    B1, B4, B2, B5

    And it Worked..

    Many Thanks Robert..

     

    Varad Gupta