# errors in /var/log/messages messages.4:Sep 30 09:56:42 uprrdb004 kernel: NETDEV WATCHDOG: eth0: transmit timed out messages.4:Sep 30 09:56:42 uprrdb004 kernel: tg3: eth0: transmit timed out, resetting messages.4:Sep 30 09:56:43 uprrdb004 kernel: tg3: eth0: Link is down. messages.4:Sep 30 09:56:46 uprrdb004 kernel: tg3: eth0: Link is up at 1000 Mbps, full duplex. messages.4:Sep 30 09:56:46 uprrdb004 kernel: tg3: eth0: Flow control is off for TX and off for RX. messages.4:Sep 30 09:57:24 uprrdb004 network: Shutting down interface eth0: succeeded messages.4:Sep 30 09:57:30 uprrdb004 network: Bringing up interface eth0: succeeded messages.4:Sep 30 09:57:32 uprrdb004 kernel: tg3: eth0: Link is up at 1000 Mbps, full duplex. messages.4:Sep 30 09:57:32 uprrdb004 kernel: tg3: eth0: Flow control is off for TX and off for RX.
We are having network connectivity issues. As you can see by the above messages there is a timeout issue. Any ideas would be more than welcomed. I have tried pci=noacpi in grub but to no avail. Time is limited on this box as it is production and cannot be taken down to frequently.
Forgot to add to previous post. I see dell has a broadcom 5700 series driver in rpm format. Does anyone else have experience using drivers in this fashion. I have never used a vendor specific driver for anything.
ebdoran
4 Posts
370
0
Posted October 27th, 2008 16:00