Trying to install the O/S on a brand new PE 2950 server and it will not boot from my Windows 2003 install media, gives the error message "CDBOOT: Cannot boot from CD - Code 4" or something quite similar. The message only stays on the screen for a couple seconds then the screen blanks out , and starts from fresh at the top of the screen with the message about there being no operating system (which I'm attempting to install).
My Windows 2003 install CD is the 2003 Enterprise Edition that has been slipstreamed with SP1. Yes, it is a "burned" CDR disk, but it boots and works perfectly fine in a nearly brand new PowerEdge 2850 machine, and also in two other older PowerEdge 2600 boxes. The only difference is that all those other machines have only plain-jane CDROM reader drives and this new PE2950 has a combo DVD-Reader/CD-RW drive in it. Is the combo drive being too picky about booting from a burned bootable CD?
Cannot see the whole drive under the metal plate that covers it, but I can see something that looks like "HL Data Systems" or something like that. I plugged in a generic CDROM drive to the IDE and power cables and got my utility partition set up and my Windows 2003 installed using that drive instead. The combo drive seems to work fine otherwise, except for it just doesn't like to boot from some of my bootable disks. I'm wondering if it's some kind of DRM junk they've put into the drive's firmware.
Message Edited by NumberNine on 10-24-2006 03:35 PM
NumberNine
17 Posts
509
0
Posted October 18th, 2006 16:00