I have several Poweredge 1750 servers that will not see a second Qlogic QLA2460 card.
The first pci slot has a Qlogic QLA2340 card, which works ok.
When putting in the second card, the qlogic bios screen does not see the second card. Interesting to note is that the Dell bios screen under pci bus configuration screen sees the card.
Any thoughts why these servers cannot see the second card ?
I have in the past more more than 2 cards in other vendors systems.
Check the Qlogic website for the latest code levels of each adapter.
x86 Boot BIOS v1.47 is the latest for the QLA2340.
For the QLA2460, package v1.17 is the latest.
Make sure that the QLA2460 card is the only adapter in the system. Thsi will verify if the adapter is recognized at all. Also, try placing the 2460 in the opposite slot.
Mark_A_Smith
2 Intern
•
827 Posts
405
0
Posted July 24th, 2006 14:00
This is a known issue with the older Qlogic firmware. Update your firmware to 1.37 on the HBAs:
http://support.qlogic.com:8080/KanisaSupportSite/dynamickc.do?externalId=http--supportqlogiccom-support-driverssoftwareasp&sliceId=&command=show&forward=nonthreadedKC&kcId=http--supportqlogiccom-support-driverssoftwareasp