UNSOLVED

eskal

updated

23 years ago

E

eskal

2 Posts

0

6451

March 23rd, 2004 13:00

PE 400SC drivers

I'm unable to find the drivers for the USB 2, its not on the download site on Dell.  please help.  thank you
  • theJapester

    1 Rookie

    •

    42 Posts

    282

    0

    Posted March 23rd, 2004 22:00

    What OS?  There is no separate USB driver, if you load the chipset (mobo) driver and the right service pack for your OS you'll be good to go.

  • eskal

    2 Posts

    282

    0

    Posted March 24th, 2004 12:00

    its for win Xp.  the reason for this "Dumb" question is because i was unable to use the usb 2.  all the ports was only usb 1.  how i found this out is when you plug in a usb 2 device, win xp states that ur only using usb 1 not 2.  where can i obtain the chipset "mobo"?  Thank you for your response.

  • theJapester

    1 Rookie

    •

    42 Posts

    282

    0

    Posted March 25th, 2004 03:00

    Just use the Win2003 drivers, they work fine under XP. 

    http://support.dell.com/filelib/Devices.aspx?Category=0&OS=WNET+&OSL=EN&SvcTag=&SysID=PWE_PNT_P4_CEL_400_SC

    First make sure you have either XP SP1 or XP SP1a installed, then install the Intel 875P Chipset driver from the link above (same driver for Windows 200 and later).

    Also, experiement with which USB port you are plugged into.  It's not supposed to make a difference (doesn't affect mine) but some people have reported better results by using specific USB connectors.