
UNSOLVED
PDUs
I just ordered a 60Amp PDU for my m1000e but when it came the actual unit says it is rated 48Amps. It has 3 outlets, each rated 16Amps. Here is a link to the unit I ordered: <ADMIN NOTE: Broken link has been removed / replaced from this post by Dell>
I tried searching for a 48Amp unit on dell's website but didn't find any. Did I get the right one or is the one I have really a 60Amp? Tech support never responded and customer care said to contact tech support. I'd rather not play another game of phone tag w/ them so thought I'd find out here.
thx!
Responses (1)
Solutions (0)

pcmeiners
6 Operator
•
1771 Posts
168
0
Posted May 23rd, 2009 09:00
If the PDU goes to standard, the 60 amp spec is the maximum short term surge rating , the 48 amp is the sustained rating (constant). Most components are designed with a margin, so you should be able to run a sustained current of approx 55 amps.
Had a similar situation, years ago, I ended up opening the unit and replacing the relays with one with higher contact ratings, but this is an extreme measure and a royal pain.
What a rip on the price for a simple power circuit controller.