Is iDRAC showing GPU details under "Hardware Inventory" on "System -> Inventory " page. Can you confirm iDRAC FW version installed on the server. Can you update to latest FW and try if iDRAC FW is not latest?
Based on the above screenshots, the hardware inventory shows the NVS310 and it does mean that it is required the OS driver in order to present the usage?
The GPU card installation guidelines say: - GPU is supported in the rack and tower mode configuration. (met) - Supports one GPU on x16 slot (slot 3) with two processors on it. (met) The GPU cards must be installed, on GPU enabled system (two processors and also contains the main air shroud and GPU air shrouds). (met) - GPU can be installed only on systems that have 1100 W or higher power supply units.(not met)
As you mentioned that there are 750W PSU installed - there is not enough power available for the card.
DELL-Stefan R
Moderator
•
790 Posts
2694
0
Posted March 4th, 2021 06:00
Yes, this is what I wanted to say.
Please check out the GPU installation guidelines here:
https://www.dell.com/support/manuals/de-de/poweredge-t440/pet440_ism_pub/gpu-card-installation-guidelines?guid=guid-1294f1b2-6679-4627-8895-1ca1f4ad745e&lang=en-us