UNSOLVED

unisysdan

updated

22 years ago

U

unisysdan

7 Posts

0

5496

October 8th, 2004 19:00

Flushing Cache on PERC 3/di

Is there a way to flush the cache on the PERC 3/di without opening up the case? Recently, I had an issue that required a hard shutdown. This caused an issue with the PERC 3/di not allowing the machine to boot. We needed to have a tech go onsite to reseat the ROMB, DIMM, and Battery. This helped the machine to come up. If this happens again, what could be done to prevent an onsite tech?

I know that some issues could have the AC plug pulled for 2 minutes to flush the cache, but I don't believe that applies to the raid cache. Any utilities or other suggestions besides reseating components? Thanks.

No Responses