Having problem to upgrade (or fresh install) an VMWare Esxi installed on an Powered R630. The server was delivired with VMWare 5.5 already installed on SD card media. When trying to upgrade i get "Permission Denied" (see attached picture). Have tried upgrade with bootable usb, cd and VMware update manager, all failing.
It looks like it is trying to modify the datastore. The datastore is likely on the physical disks and not the SD. If you are not using our custom image then the drivers required to properly communicate with the storage may not be loaded.
Hi, thanks for your answer :) I have tried using VMware media downloaded from VMware site and also after being in contact with Dell support i got the special Dell ESXI version, but i get the same problem with both versions.
Make sure you write down your product key before performing a fresh install. You can view it from the license section.
Set the USB mode to 2.0 and try the upgrade again. If the issue persists and you are already working with warranty support then it would be best that you continue working with them since a review of your configuration and all options that you are selecting will be needed.
For anybody that finds this thread like I did a couple days ago....
There's a read only partition on the SD cards when shipped from the factory. When we tried to upgrade to 6.0U1 from 6.0, the installer from Dell could not overwrite that partition. After working with support for 9 hours, we discovered that the only option was to do a fresh installation.
Are you sure coredump wasn't configured to be on the SD Card? I recently had a similar problem and it turned out to be the coredump partition. Here is what I did
Daniel My
12 Elder
•
6204 Posts
1417
0
Posted October 10th, 2015 15:00
Hello
It looks like it is trying to modify the datastore. The datastore is likely on the physical disks and not the SD. If you are not using our custom image then the drivers required to properly communicate with the storage may not be loaded.
Thanks