When trying to upgrade BIOS on my R740 using Linux from version 2.2.11 to 2.4.8 I get an error never seen before, it would be nice if someone had a clue about it:
# sh BIOS_9P3C0_LN_2.4.8.BIN
Collecting inventory...
Running validation...
PowerEdge BIOS
The version of this Update Package is newer than the currently installed version. Software application name: BIOS Package version: 2.4.8 Installed version: 2.2.11
Continue? Y/N:y Executing update... WARNING: DO NOT STOP THIS PROCESS OR INSTALL OTHER PRODUCTS WHILE UPDATE IS IN PROGRESS. THESE ACTIONS MAY CAUSE YOUR SYSTEM TO BECOME UNSTABLE! .............terminate called after throwing an instance of 'smbios::InternalErrorImpl' what(): Could not instantiate SMBIOS table. . The update failed to complete
if you have access to the idrac gui, you can download BIOS_9P3C0_WN64_2.4.8.EXE from the support site, then open the idrac gui by its IP address, then go to Maintenance> System Update, then Choose File and point it to BIOS_9P3C0_WN64_2.4.8.EXE, and then click as shown in the screenshot.
What version of Linux are you working with? Does the update only err when trying to run from the OS, or does it also fail if you try to update through the iDRAC with the .EXE?
Are you running this as root? Confirming based on the '#' in the first line of your paste.
I'm using Debian 10, which generally works fine with Dell binaries, I recently upgraded a R730 with the latest .BIN file. And I run the script as root.
In my understanding the .EXE can only be run with Windows, if there is a way to run it otherwise I would be glad to try it.
1. BIOS update is executed using Dell Update package ( DUP) 2. BIOS update is launched in UEFI booted Linux OS. 3. Mcaffee or other antivirus software may be installed. 4. Secure boot enabled in system.
Potential workarounds to perform BIOS update are: 1- Linux Inband Updates will be successful after gvfsd-fuse unmount and efi filesystem remount. Command to achieve this are 2- umount /run/user/0/gvfs umount /sys/firmware/efi/efivars/gvfsd-fuse #remounting efivars - mount -t efivarfs efivarfs /sys/firmware/efi/efivars 3- BIOS Update from Out Of Band
thanks
Marco
DELL- Marco B
Social Media and Communities Professional
Dell Technologies | Enterprise Support Services
#IWork4Dell
Did I answer your query? Please click on ‘Mark as Accepted Answer’. ‘Thumbs up’ the posts you like!
DELL-Rey G
4 Apprentice
•
1068 Posts
3074
0
Posted December 5th, 2019 12:00
if you have access to the idrac gui, you can download BIOS_9P3C0_WN64_2.4.8.EXE from the support site, then open the idrac gui by its IP address, then go to Maintenance> System Update, then Choose File and point it to BIOS_9P3C0_WN64_2.4.8.EXE, and then click as shown in the screenshot.
#Iwork4Dell