
UNSOLVED
1550 memory post errors
There is a gig of RAM in this machine and on the initial memory count it displyas accurately. After it loads drivers for SCSI and RAID controllers however, it halts before booting the OS (W2K Pro) and says that it only has 256Mb of memory available. Windows is reporting the 256 value as well and basing page file swap on it.
I've tried different DIMM's (2 - 512's) and have tried different different banks on the motherboard with the same result.
Has anyone encountered this?
Thanks,
T.C.
Responses (2)
Solutions (0)

Per_R.
157 Posts
196
0
Posted November 5th, 2004 19:00
This sounds like the "OS Install Mode" is enabled in the system BIOS of your PowerEdge server. This option is to avoid problems during the installation of some operating systems like NT4. Enter the system BIOS while POST by pressing F2 and then set this option to disabled/off.
Message Edited by Per_R. on 11-19-2005 02:53 PM