Is there a newer type memory card reader (higher speeds) that will fit into a front slot in my Optiplex 9020 and connect to the motherboard. I'm mostly using SD cards.
Yes—but with an important speed limit: for a front-bay internal reader in an OptiPlex 9020, the practical modern upgrade is a USB 3.0/3.2 Gen 1 internal SD reader with UHS-II support, connected to the motherboard’s 19-pin USB 3.0 header. That will be much faster than the old USB 2.0-style reader, but it will not reach SD Express speeds.store.xma.co
What fits your OptiPlex 9020
Your 9020 (Mini Tower or SFF) can take a 3.5-inch front-bay internal card reader. Look for one that has:
A standard 3.5-inch front-panel/bay form factor
A full-size SD card slot (ideally also microSD)
A USB 3.0 19-pin internal motherboard header connector
Explicit UHS-II SD support if your SD cards are UHS-II
A good example is the StarTech 35FCREADBU3, a 3.5-inch internal multi-card reader with USB 3.0 and UHS-II support; it is designed to turn a 3.5-inch internal bay into a front-access reader. Older internal readers such as the StarTech 35FCREADBK3 connect through a 10-pin IDC motherboard header and are USB 2.0-class, so they are not the upgrade you want.bestbuy+1
Expected speeds
Reader type
Typical real-world SD transfer ceiling
Suitable?
Reader type
Typical real-world SD transfer ceiling
Suitable?
Old internal USB 2.0 reader
About 30–40 MB/s
No
Internal USB 3.0 UHS-I reader
Up to roughly 104 MB/s with a UHS-I card
Yes
Internal USB 3.0 UHS-II reader
Up to roughly 312 MB/s with a UHS-II card
Best internal option
External USB 3.2 Gen 2 / SD Express reader
Up to several hundred MB/s, or up to about 985 MB/s with SD Express cards
Best if maximum speed matters
So there is a bit of research required.
Before buying, check whether your 9020 is the Mini Tower or SFF version and confirm it has a free 3.5-inch front bay and a spare 19-pin USB 3.0 motherboard header.
anne_droid
6 Operator
•
2645 Posts
•
9723 Points
0
0
Posted November 2nd, 2026 12:52
Hi
Maybe, with a few caveats....
Yes—but with an important speed limit: for a front-bay internal reader in an OptiPlex 9020, the practical modern upgrade is a USB 3.0/3.2 Gen 1 internal SD reader with UHS-II support, connected to the motherboard’s 19-pin USB 3.0 header. That will be much faster than the old USB 2.0-style reader, but it will not reach SD Express speeds.store.xma.co
What fits your OptiPlex 9020
Your 9020 (Mini Tower or SFF) can take a 3.5-inch front-bay internal card reader. Look for one that has:
A standard 3.5-inch front-panel/bay form factor
A full-size SD card slot (ideally also microSD)
A USB 3.0 19-pin internal motherboard header connector
Explicit UHS-II SD support if your SD cards are UHS-II
A good example is the StarTech 35FCREADBU3, a 3.5-inch internal multi-card reader with USB 3.0 and UHS-II support; it is designed to turn a 3.5-inch internal bay into a front-access reader. Older internal readers such as the StarTech 35FCREADBK3 connect through a 10-pin IDC motherboard header and are USB 2.0-class, so they are not the upgrade you want.bestbuy+1
Expected speeds
Kind Regards
anne_droid