UNSOLVED

BernardIE5317

updated

4 years ago

B

BernardIE5317

1 Rookie

•

10 Posts

0

324

January 9th, 2023 16:00

SATA Drive Will not Permit Write After PCIe SSD install

Dell OptiPlex 7040 Small Form Factor

After install of SSD 1TB PCle 3.0x4, NVMe M.2 2280, Internal Solid State Drive and made it the boot drive C original C drive SATA SSD is now G but will not permit writing to

Kindly Advise Thank You

  • BernardIE5317

    1 Rookie

    •

    10 Posts

    264

    0

    Posted January 9th, 2023 19:00

    Thank You for Your Kind assistance

    I did not alter BIOS : Settings : SATA Operation : RAID On

    It remains as shown here

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    269

    1

    Posted January 9th, 2023 19:00

    Did you switch bios>sata operation to AHCI from RAID which is Dell default?

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    251

    0

    Posted January 10th, 2023 05:00

    Try change that to AHCI, save changes, exit bios.  Do a clean Windows install on the new nvme ssd which is your boot drive.  You can wipe the original sata ssd and use it as a secondary data drive.

  • BernardIE5317

    1 Rookie

    •

    10 Posts

    242

    0

    Posted January 10th, 2023 19:00

    I was mistaken when i stated writing to G was not permitted . i now noticed it is permitted but only w/ administrator privileges e.g. each time I save a file to G from a text editor in particular BowPad an administrator privileges window pops up . This of course is inconvenient and prevents automatic operation such as utilizing G as an automatic scheduled mirror of C . i set SATA Operation to AHCI w/ same effect as described above so i set it back to RAID . i do not wish to do any OS installs . 

  • Chino de Oro

    11 Legend

    •

    8563 Posts

    •

    47191 Points

    238

    0

    Posted January 10th, 2023 21:00

    This type of issue could have happened if you introduced 2 bootable drives into your system.  A simple solution is to perform a clean (erase all partitions) using diskpart, then initialize and format using disk management.  But if the drive contains data and just needing to get automatic access, you can right click on drive G and select properties =>  Security tab =>  Advances, and editing permissions to take over the ownership.  It is not recommend if you are unfamiliar with these settings.

  • BernardIE5317

    1 Rookie

    •

    10 Posts

    235

    0

    Posted January 10th, 2023 22:00

    The Permission for G are and always have been identical to those of C . 

  • Chino de Oro

    11 Legend

    •

    8563 Posts

    •

    47191 Points

    230

    0

    Posted January 11th, 2023 02:00

    Yet the issue, so it may show own by system but with a (previous) different system ID.  If drive G has data on it, consider to make backup externally and formatting the drive to fix the issue.