Hi all. I'm looking for reference and help with possibly upgrading my stock PSU in my Optiplex 5060SFF (I believe it's 200w) to 460w.
Now, I've seen in past threads someone received help and was pointed toward a 360w PSU that would fit the SFF's case. I too am doing this for GPU reasons, as I believe I am bottlenecking my current one, and it was upon looking that 360w PSU up that I learned of this "H460EBM-00 460W Power Supply".
Its description says it is compatible with, and cue a drumroll: For Dell Optiplex 5060 5090 7050 7060 7070.
But I don't know what I don't know. Are the cords and pins also compatible? Will it work on an SFF? Please help, as I have already placed the order.
I'm back with an update! I'll embolden the parts I think are important, hopefully they'll help someone down the line.
I got the 460w PSU and it does indeed slot in perfectly to the Dell 5060SFF mobo and case with no drawbacks. It is recognized and works without issue.
There are a couple of unused pins that I needed to tuck down to keep them neat, and the cable size and amount is slightly larger than the stock 200W PSU, but not so much that it's impossible to fit inside.
The 460W PSU is in fact slightly smaller than its 200W counterpart, at least the one I bought is.
I'm currently using it to power my GTX 1650 which doesn't need an external PSU. However, before now my 200W PSU worked just fine for my GTX 1650. And I had forgotten that my GTX 1650 was in fact, installed into my PCIe x4 slot, as the x16 slot is obscured by the PSU size and GPU above it, This has never presented an issue and I have played games ranging from Helldivers 2, Skyrim, State of Decay 2, Mass Effect 3, No Man's Sky, 7 Days to Die, Left 4 Dead, Dying Light 2, Dark Arisen, Sons of the Forest, and GTA V all without issue. Medium graphics, >=1080p.
I am now considering upgrading the GPU to something that can take advantage of the PSU now, though I don't know if other GPUs will function as good in the PCIe x4 slot. Still, I hope this info helps someone.
@redxps630 First I just want to say thank you so much, your answers have helped and guided me a lot in the past and I'm really grateful.
Secondly... dangit. I already sent the order off, so I'm going to pray, check my PSU and compare it to the product's pictures, and then perhaps bite the bullet and try it if they still match. Maybe I missed something in their design. It's free returns so that's no issue.
I'll post the page for it here, as well as a screenshot for posterity when the product is no longer available. Maybe it'll help someone down the line.
@Artt Vandelayhey man i know its a bit late ...i hoep you read this....i wanted to ask if your current setup(with the new 460w psu) is working or not?.....i was thinking of doing the same thing .....share the link of what psu you ordered ....thx in advance
redxps630
11 Legend
•
16431 Posts
•
83176 Points
0
0
Posted March 26th, 2024 03:17
Dell has never validated any 460w psu for 5060.. the spec mentions only 260w and 200w psu for MT/SFF.
The Dell 360w and 300w psu is for Optiplex XE3. Its use for 5060 is off label, but it is compatible as XE3 and 5060 mobo both have 6+4 pin.
reference: https://i.dell.com/sites/csdocuments/Shared-Content_data-Sheets_Documents/en/OptiPlex_5060_Spec_Sheet.pdf
https://i.dell.com/sites/csdocuments/Shared-Content_data-Sheets_Documents/en/OptiPlex_XE3_Spec_Sheet.pdf
https://www.dell.com/support/manuals/en-us/optiplex-xe3/opti_xe3_mt_servicemanual/removing-system-board?guid=guid-d3b53675-a649-4920-8ec6-d2d76362a2ad&lang=en-us
https://www.dell.com/support/manuals/en-us/optiplex-xe3/opti_xe3_sff_servicemanual/removing-system-board?guid=guid-3785c092-2f02-4a08-8a3c-d015ec791d6c&lang=en-us
(edited)