UNSOLVED

spinus777

updated

8 years ago

S

spinus777

2 Posts

0

810

January 28th, 2019 16:00

Optiplex/Inspiron PSU pin compatibility

Hi!

I have an Optiplex 7020 SFF and an Inspiron 3656. I was wondering about the pin compatibility between their respective PSUs. The pins appear to match and the rail specs are very similar:

 

7020 (4+8 pins, 255W):

12VA / 14A MAX

12VB / 13A MAX

12Vsb / 1.67A MAX

 

3565 (4+8 pins, 180W):

12VA / 12A MAX

12VB / 14A MAX

12Vsb / 2.5A MAX

 

The 7020 has a slightly better energy rating and I was wondering if it would be safe to switch them over. I'm not worried about the standby amperage being different, since I'm assuming it is to account for the standby LED lighting on the 3656, which I'm not using anyway.

Any feedback appreciated!

L

 

EDIT: For anyone thinking I'm pulling this out of thin air, I should perhaps add that the Optiplex 3040/5040/7040 SFF PSUs are sold by third party dealers as compatible with the Inspiron 365x line.

  • spinus777

    2 Posts

    573

    0

    Posted January 31st, 2019 15:00

    Could someone please shed some light on this issue?

  • Bill-UK

    1 Rookie

    •

    40 Posts

    526

    0

    Posted February 3rd, 2019 01:00

    fwiw, studying photos, it is clear the 3 rear fixing holes, shape, and dimensions of the PSUs for the 7020 SFF and 7040/3656 are different, which is perhaps why no one has responded because it is not normal practise to install a 7020 psu into a later generation 7040/3656 case.

    If the actual voltages on the plug leads, along with the colour of the wires are identical, and the plugs fit the motherboard, there good chance the 7020 SFF power supply is pin compatible with the later 7040/3656 motherboards. 

    If the PSU won't fire up when you press the on/off button then it may be because the signalling protocol is different between the motherboard and the PSU. (I've seen this with HP PSUs).  Of course, you test it at your own risk of damaging motherboard or PSU.