My Optiplex 3040 is not booting. No Lights. No Post. Dead.
The power button does not turn it on.
Steps taken thus far:
Unplugged all cables for 30min. Replugged and powered on - failed. No lights. No post. Dead.
Unplug power cable from from wall. Unplug power cable from PC. Hold down power button for 1+minute. Replugged power cabled. Failed.
Unplug power cable from from wall. Unplug power cable from PC. Hold down power button for 1+minute. Hold down Selft Test button on the back of PC. Replugged power cable. Failed.
Unplugged all cables. Opened case. Used canned air to dust components. RAM, Powersupply, CPU, etc.. Not very dusty to begin with. Replugged. Failed.
With Power cable plugged in. Pressed Self Test button. LED next to self test button turned on, fans turned on. No post.
I'm having the same issue with a customer's computer (same model), i changed the power supply with no change, i figure it's the motherboard or cpu at this point...
Did you ever find out what was the issue with your's?
Hi bro I just wanna tell you THANK YOU!!. i had the same problem where it was not booting I know it didn't work for you and im sorry for that but the first solution really worked for me. I had lost all hope that it would turn on and was scared that I somehow broke my pc. I know this was not the comment you were hoping for but again sincerely
Mary G
6 Operator
•
20095 Posts
2685
0
Posted October 19th, 2020 12:00
Buy a new cmos coin cell battery for about $2 and replace it. Choose your model's manual from here
for directions on how to replace it. It should be a CR 2032 battery available anywhere that sells batteries. But check it when you remove it.
That might not be the problem but if it is, it is a cheap fix.