UNSOLVED

user_12a80d

updated

9 months ago

U

user_12a80d

1 Rookie

•

1 Message

•

2 Points

0

366

February 9th, 2026 00:12

Dell OptiPlex 7040 SFF – How to connect Bluetooth cable from PCIe WiFi card (INT_USB header incompatible

I’m installing a Fenvi AX1800 PCIe WiFi + Bluetooth card in a Dell OptiPlex 7040 SFF and I’m unsure how to connect the Bluetooth cable.
The card came with a standard 9-pin USB header cable, but the only internal USB header on the motherboard (INT_USB) appears proprietary and the key pin doesn’t match, so the cable won’t plug in.
I also don’t see any other internal USB headers available.
I haven’t tested the WiFi yet — I’m trying to finish the install correctly first.
Questions:
• Has anyone installed a PCIe WiFi + Bluetooth card in this model?
• How did you connect the Bluetooth cable?
• Is using a USB-A to 9-pin adapter into a rear USB port a safe solution?
• Is there a Dell cable that works with the INT_USB header?
Thanks for any help!

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    0

    Posted February 9th, 2026 01:10

    Generally, any antennas that are still inside the computer only work with the factory hardware. Your after-market card should have come with antennas (so use them). I've never really seen one with an extra USB-port.

    I ordered a refurbished Dell Optiplex-7090-SFF for a client. I thought kinda weird it didn't come with wireless networking. I like real wires, but they are WiFi-crazy so I upgraded it to WiFi-6E and Bluetooth 5.1 for them. I wanted it to look "as factory" as possible.

    I ordered this 2230 M.2 WiFi-6 BT-5 MiniCard. It worked in the existing M.2 slot, and I used the supplied antennas on the low-profile bracket (out the back). Works fine and looks factory.

    (edited)

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    0

    Posted February 9th, 2026 02:13

    I looked it up and saw that card at Newegg.

    Very strange ... I have no idea why you would need to connect an extra cable to an internal USB-header when you just installed a whole PCIe card in a PCIe-slot.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • Chino de Oro

    11 Legend

    •

    8554 Posts

    •

    47161 Points

    0

    2

    Posted February 9th, 2026 07:18

    Yes, the INT_USB header is compatible to connect your 9-pin USB connector.  You skip the 4-pin from coin cell battery and just use the other 9-pin with matching key on the connector, see picture below.

    Hello @Tesla1856 , the PCIe slot primary power only provides 12v and 3.3v.  While the wireless card uses 3.3v, the bluetooth needs 5v source for power.  Therefore, external USB connector is needed to power bluetooth.

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    0

    0

    Posted February 9th, 2026 19:39

    @Chino de Oro ,

    Good post, as it should help OP.

    As far as the designers of this Fenvi PCIe card, I guess they never heard of a Buck-Converter?

    Also notice the M.2 minicard I mentioned (and many others like it) just work from a little-baby M.2 slot.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.