after i installed winxp pro, it can't find wireless network at all.... i really dont' have any idea, because other comps on the same Wi-fi network gets on fine.. but not this one.
i've updated drivers and such, but no luck.. any help would be appreciated
I just received my 9100 about a week ago and have yet been able to connect to my d-Link 614+. I've spent several hours on the phone with tech support basically formatting the computer and reloading everything and it still has not worked. I had a tech promise to send me a new 1350 yesterday which I will be following up on.
The 614+ has the latest software and I have two other laptops connected wirelessly with no issues. I don't have any security enabled, sitting at the same desk, it won't see the network.
After being on the phone with tech support 3 straight days and reformatting my brand new computer, I figured out that I was too close to the router. I couldn't believe how much time I spent on the phone and I ended up finding the solution. I'm not sure how close you are to the router, but try putting 8-10 feet separation between the router and your laptop.
Ed C
2 Intern
•
3247 Posts
197
0
Posted June 23rd, 2004 23:00
You need to install the drivers for the card and if you are using WPA security you need the WPA rollup package from MS.
Most likely you haven't installed the drivers for the card.