i am using dell inspiron N5050 and my wifi is not connecting automatically after power cut and i have to reboot the device then it connects to the network. i have already updated the drivers and reinstalled the win 7 ,
If I'm reading this correctly, you are connecting but then loose the connection and it does not reconnect, correct? If yes, then try these tweaks....
Start, control panel, device manager. Click on Network and then right click on your network adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.
Go to the power options, and changed the Wireless Adapter Setting, from Maximum Power Setting to Maximum Performance.
I would suggest you to delete the wireless network under ‘Manage wireless networks’ and reconfigure the network by adding it. You can find ‘Manage wireless networks’ under ‘Network and Sharing Center’.
When you reinstalled the operating system, did you install the Dell System Software(if applicable) and the chipset drivers first? If not, the rest of the drivers will fail to install. How to Download and Install Drivers in the Correct Order
Start with the Dell System Software and the chipset drivers and follow the list.
If the above is correct, then I would download the drivers for the adapter and save them to your desktop.
Make a system restore point.
Go to device manager, network adapters, right click on your adapter, left click uninstall. Tell it to remove the software and drivers.
Restart your computer.
When you login, the new hardware wizard will try to install the adapter, but fail. Install the drivers you saved to your desktop.
Now you'll have to manually connect, make sure the box is checked, connect to this network automatically.
I'm having the same problem with a brand new Latitude E6440 that will not automatically connect to wifi. I have done everything listed in this post and I have to start the Dell Unified Wireless Application and manually check the "enable wireless radio" box before the system connects. Once that is done the system auto connects between wired connections and the wifi network. Once the laptop is rebooted or shut off and then restarted, the auto connect feature doesn't work. Let me provide a little background for you....we normally blow away the "dell image" of Windows 7 Professional and apply our own Windows 7 Enterprise 64-bit. That is when the problem starts. I have been unable to get the E6440's to auto connect between our wired and wireless networks unless I perform the above mentioned steps. None of our E6420 laptop exhibit this behavior and auto connects properly. It seems that Dell has removed the "disconnect on wired connection" setting in the Wifi driver like it's set up on the E6420's and added that feature to a new "Dell Unified Wireless Application" instead. I tried taking the corporate Windows 7 Enterprise image out of mix by manually installing Windows 7 Pro 64-bit and then installing all the appropriate Dell drivers using the "How to download and Install drivers in the correct order" documentation. I get the same results. The system will not automatically connect and disconnect between wired and wireless networks until I manually set the enable wireless radio" check box. If I use the "dell image" from the recovery partition, the wireless network auto connects just fine. So that tells me that Dell is applying some configuration setting or registry entry that I'm not aware of. Any suggestions? Regards, Mike Berrey Grass Valley USA, LLC IT Desktop Support
PudgyOne
11 Legend
•
30315 Posts
•
106638 Points
40022
0
Posted January 3rd, 2014 13:00
mkgupta0491,
Please continue with DELL-Ravi Ch
If I'm reading this correctly, you are connecting but then loose the connection and it does not reconnect, correct? If yes, then try these tweaks....
Start, control panel, device manager. Click on Network and then right click on your network adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.
Go to the power options, and changed the Wireless Adapter Setting, from Maximum Power Setting to Maximum Performance.
Rick