UNSOLVED

Mulberribush

updated

21 years ago

0

17397

June 3rd, 2005 14:00

OptiPlex NIC Drivers

Does anyone know where to get a driver for the nic in the machine? ( OptiPlex GX270) ( NIC controller chip 3Com 3C913 (Gs+ only); 3C509-compatible) Can not find one. Help!!!!
  • 252

    0

    Posted June 3rd, 2005 17:00

    Hey, just want to say thanks the link took me right to the download. installed and running fine. Thanks again
  • DELL-Stephen S

    2 Intern

    •

    1396 Posts

    252

    0

    Posted June 3rd, 2005 17:00

    Mulberribush,
     
    Thank you for visiting the Dell Community Forum.
     
    Are you sure that your system has a 3COM 3C913 NIC installed? Generally the OptiPlex GX270 system has an integrated Intel Gigabit NIC installed.
     
    You can download the Intel Gigabit NIC driver for Windows NT, 2000 & XP at the following location:
    http://support.dell.com/support/downloads/format.aspx?releaseid=R66787&c=us&l=en&s=dhs&cs=19
     
    We do have a driver in our File Library for the 3Com 3C905B NIC that was shipped on the old OptiPlex GS+ systems but this has only been tested on older operating systems such as Windows 95 and NT. This drive is available at the following location:
    http://support.dell.com/support/downloads/format.aspx?releaseid=R19340&c=us&l=en&s=dhs&cs=19
  • DELL-Stephen S

    2 Intern

    •

    1396 Posts

    252

    0

    Posted June 3rd, 2005 19:00

    Mulberribush,
     
    Thanks for the update, I am glad that it helped.
  • GIOSTORM

    1 Message

    252

    0

    Posted June 5th, 2005 00:00

    Hello,
    Having serious problems with a Dell Optiplex GX1, I bought if off the Navy after they upgraded to NMCI computers, also Dell, NIC was working fine yesterday, today it can't acquire an IP address off the DSL network I susbcribed to.  The ISP says it's a glich in the driver, or the NIC.  Can't be possible, connected a Lynksys Portable - G USB WIFI  receiver device and still having same problem. System is running on Windows XP Home, 548MHz Intel Pentium III processor, with 192mb Ram, 3Com 3C918 NIC
  • speedstep

    11 Legend

    •

    46969 Posts

    252

    0

    Posted June 5th, 2005 04:00

    Some boards dont do nway negotiation right. Force the nic to be 10 meg half duplex in the driver and see if it finds an IP. XP has 3C9XX drivers built in. Updating the Bios to A07 also updates firmware on the nic.