UNSOLVED

DSTSEVEN

updated

22 years ago

D

DSTSEVEN

1 Message

0

941

October 12th, 2004 19:00

My internet is not working

I am having problems getting on my internet. I spoke with and aol representative b/c I thought that is was them. They told me to call dell and tell them that I need re-installation of my TCP/IP.
How do I re-install that? and also what can I go to see if there is anything wrong with it.
HELP!!!!      I have a inspirion 8200 notebook.

Message Edited by DSTSEVEN on 10-12-2004 03:02 PM

  • Jesse L (retired)

    10 Wizard

    •

    17898 Posts

    •

    69016 Points

    191

    0

    Posted October 13th, 2004 16:00

    DSTEVEN,

    Thank you for using the Dell Community Forum.

    Go to start help and type in "How to install TCP/IP"

    This will give you step by step instructions.

     

    Jesse L (retired)

  • 191

    0

    Posted October 16th, 2004 20:00

     
    1. Click Start, click Run, type ipconfig /flushdns.
    2. Click OK.
    Reset  Winsock settings
     
    1. Click Start, click Run, type regedit, and click OK.
      The Registry Editor window appears.
    2. Click the plus to the left of HKEY_LOCAL_MACHINE.
    3. Click the plus to the left of SYSTEM.
    4. Click the plus to the left of CurrentControlSet.
    5. Click the plus to the left of Services.
    6. Right-click Winsock and click Export.
      The Export Registry File appears.
    7. Save the file in My Documents as Winsock.reg.
    8. Right-click Winsock and click Delete.
      The Confirm Key Delete window appears.
    9. Click Yes.
    10. Right-click Winsock2 and click Export.
      The Export Registry File appears.
    11. Save the file in My Documents as winsock2.reg.
    12. Right-click Winsock2 and click Delete.
      The Confirm Key Delete window appears.
    13. Click Yes.
    14. Restart the system.
    Reset TCP/IP
     
    1. When the system has finished restarting, click Start, Control Panel.
      The Control Panel window appears.
    2. Double-click Network and Dial-up Connections.
    3. Right-click a Network Connection and click Properties.
      The Network Connection Properties window appears.
    4. Click the General tab and click Install.
      The Select Network Component Type window appears.
    5. Click Protocol and click Add.
    6. The Select Network Protocol window appears.
    7. Click Have Disk.
      The Install From Disk window appears.
    8. Type C:\Windows\INF and click OK.
    9. Click Internet Protocol (TCP/IP) and click OK.
    10. The Network Connection Properties window appears.
    11. Click Close.
    12. Restart the system.
    13. Click Start, click Run, type netsh int ip reset delllog.txt, and click OK.