UNSOLVED

millbean

updated

19 years ago

M

millbean

1 Message

0

4324

January 22nd, 2008 15:00

LAN connectivity problem with W.Vista

I had to reinstall Windows Vista on a Inspiron 1420 because some files were corrupt.  After using the set up disc and installing the drivers, the laptop wont pick up a home internet signal from the wall.  It wil connect to a wireless router, but wont connect to the internet using a LAN line.  I know I'm missing something in the set up process, but I'm stumped.  Used ipconfig/all and posted below:
 
Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation.  All rights reserved.
D:\Users\Conrad>ipconfig/all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Conrad-PC
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : gateway.2wire.net
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix  . : gateway.2wire.net
   Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter
   Physical Address. . . . . . . . . : 00-19-7E-C5-1D-D5
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::9c3c:99aa:d9ef:8df3%8(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.71(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Tuesday, January 22, 2008 12:26:09 PM
   Lease Expires . . . . . . . . . . : Wednesday, January 23, 2008 12:26:09 PM
   Default Gateway . . . . . . . . . : 192.168.1.254
   DHCP Server . . . . . . . . . . . : 192.168.1.254
   DHCPv6 IAID . . . . . . . . . . . : 134224254
   DNS Servers . . . . . . . . . . . : 192.168.1.254
   NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter Local Area Connection* 6:
   Connection-specific DNS Suffix  . : gateway.2wire.net
   Description . . . . . . . . . . . : isatap.gateway.2wire.net
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::5efe:192.168.1.71%9(Preferred)
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 192.168.1.254
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Local Area Connection* 7:
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e66:30e2:36dd:3f57:feb8(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::30e2:36dd:3f57:feb8%10(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled
D:\Users\Conrad>
  • best-try

    279 Posts

    211

    0

    Posted January 22nd, 2008 17:00

    Hi,
     
    The ipconfig details on your post doesnt give details of your LAN line. It gives details only about Wireless Adapter and two Tunnel Adapters (Use for VPN). This can be because of four reasons;
     
    1) Wall Jack or the Network Jack on the computer.
    2) Cabling
     
    To check for the above two, check if the link lights come ON on the network jack of the computer when cable is plugged at both ends.
     
    3) Network Card Driver isnt installed - Check for this in device manager of Vista. Check for any bangs for Ethernet controller
    4) Network Card is Disabled in Device Manager - Check if the network card listed under Network Adapters has a red X around it. If this is the case, right click on it and click on enable
    5) If all the above steps have been verified, get into Network and Sharing Center through Start and typing Network and Sharing Center in the search box -- On the left side on the Network and Sharing Center Screen, look for Manage Network Connections -- Click and check if Local  Area Connection for the Network Adapter is listed and is enabled. Use the Right Click option to enable the connection if found disabled.
     
    Rgds
    Chris