I got my mew m140 a couple of days ago and have noticed that in "Network Connections", under the group Internet Gateway, there is an icon called Internet Connection.
I have a cable connection, and both my desktop and notebook are connected to the Internet directly through a hub. My desktop is running XP Pro and I have never seen Internet Gateway/Connection in my Net Connections folder.
When I ran the connection wizard in my notebook, I specified that there was no connection sharing and that all the machines in the network connected to the interent directly or through a hub, so I am puzzled as to why I have this gateway item.
Does your cable modem have a USB connection? If so, did you install software for your cable modem? If so, then it installed the software necessary to make the USB connection work and that is what is showing up as another network connection.
maybe I should have have been more thorough in my response. The modem (a Motorola Surfboard) does not have USB connections, only an ethernet one. It does not requiere any drivers either, so none were installed. The only drivers installed in the machine are those that came factory installed.
Whether or not you connect through USB, if your modem has the capability of connecting through USB and you installed the software, then the internet gateway will show up as a networking device. It will be there whether you have ever used the USB connection or not.
I believe I might have found the answer tho: The Wi-Fi connection comes from someone in my building and a friend of mine told me that the Gateway showing in my network is the router I am connecting to.
I also have a Motorola Sufboard modem which has both a USB and ethernet connector. There is no need to install software if you are only using the ethernet connection. On one of my computers, I needed to use the USB connection during troubleshooting and thus needed to install the software. That is the only computer on my network that has the internet gateway installed (the computers normally connect to a router connected to the modem). Which model Motorola do you have?
If you have a value for 'gateway' hard-coded and it does not match the connection you desire, you may get it to work simply by doing an Edit to the TCP/IP 'gateway' address to Remove it and leave no 'gateway' value at all.
volcano11
2 Intern
•
27973 Posts
268
0
Posted May 5th, 2006 19:00
Does your cable modem have a USB connection? If so, did you install software for your cable modem? If so, then it installed the software necessary to make the USB connection work and that is what is showing up as another network connection.
Steve