I have been happily using Symantec Ghost Corporate for years (currently 7.50335) and floppies mapping network drives, or ghostcasting have worked fine on all PCs (with proper NIC driver) until today! On the Dell GX270 (only integrated NIC), ghost.exe freezes on first gui display, whether run from MS DOS, PC DOS, floppy media or network drive. Symantec's knowledge base only suggests disabling legacy USB support, which did not help us. Reducing the RAM did not help (from 1GB to 256MB).
All this worked fine on the GX260, which has the i845 chipset. The GX270 has the i865, and slightly upgraded Intel Pro/1000 NIC with CSA. The latest DOS driver (3/9/2003) is of course being used. I used an eval copy of PowerQuest DeployCenter, and it created floppies which work fine with the same driver. Modifying one of those floppies to launch ghost.exe instead did not make a difference--ghost still freezes. However, if network drivers are not loaded, ghost.exe runs fine and never freezes.
I can't tell you what a relief it is for me to read that somebody else has the same problem. Any progress on our end will be updated here as soon as possible. Good luck!
As Peter said, it is certainly a relief to know that others are having this Ghist 7.5 lockup problem. I thought I was going nuts. For us, the problem is two-fold...
Our first batch of GX270 PCs were bought without floppy drives. I don't know if our Dell sales rep pushed that decision or if it's just a bad call on the part of my management, but this is a serious pain!! It's a nasty Catch-22... How do you get a PC onto the network to blow down a large Ghost image if it has no floppy drive. Argh!
Okay, so I borrowed a floppy drive from a GX260 and that gets me past that issue, but once I fire up Ghost 7.5 to begin blowing the image down, it locks. Argh!
So, I thought I'd be crafty and use our FireLite 20gb external USB hard drive instead. (I have an ever-so-handy boot disk that gives me DOS support for this drive and I've used this as a means of loading images on nearly every model of Optiplex with no problems, although, for obvious reasons, it works mucho faster on the newer models that feature USB 2.0.) Long story short... even running from the FireLite, Ghost doesn't lock up, but it does display a General Exception Error message, "36000 error: an internal inconsistency has been detected" and then the program aborted back to the DOS prompt. When I examined the GHOSTERR.TXT file, one line item really jumped out at me:
Processor exception Generated at HardExceptionHandlerDjgpp.cpp:314
This makes me think that this problem is not NIC-related.
I'd sure appreciate any insight that anyone else could offer...
Rob O'Daniel Desktop Mgmt Analyst Medical Center Hospital
I'll give that a try. I was pretty sure it was memory related to begin with but I found it strange that EMM386 worked just fine with the GX260 series and the same NIC but not on the GX270.
The only difference being that there is a higher amount of memory available in the GX270 series. This normally is a good thing, but I guess the pendulum can swing both ways.
Hopefully this will be patched in a driver update.
I have tried bootdisks without EMM386, and they work fine with every app except ghost. I also manually reduced the memory to 512, and also tried the "OS install mode" in the BIOS, which reduces the memory to 256. No difference.
Peter.Anderson
7 Posts
812
0
Posted June 4th, 2003 13:00