UNSOLVED

Blindmelonball

updated

22 years ago

0

5352

March 24th, 2005 06:00

Can't Re-connect to Wireless Network

I've got an Inspiron 8600, Windows XP Home, SP1.

I disconnected from my wireless network connection by pressing Fn F2, and now I can't seem to get the signal back.  This is the first time I've done this. (I just wanted to see how the Fn F2 worked.  I've been connecting to my wireless network just fine for nearly 9 months.)

My network connections window has Wireless Network Connection listed, but as unavailable.

A right click properties shows that I have "Use Windows to configure my wireless network settings" enabled (as it always has been), but there are no available networks listed.  The network is listed in "Preferred networks", though.

I have an Inspiron 6000 XP Home, SP2 running right next to the 8600, and it is connected to the wireless network (strong signal, too) just fine.

What have I done?

Thanks,

Message Edited by Blindmelonball on 03-24-2005 12:43 AM

  • iconsam

    15 Posts

    460

    0

    Posted March 24th, 2005 08:00

    Have you tried to press the Fn F2 button again to reactivate your network card? If so, make sure that the wireless card isn't set to be disabled by your Quick Settings.

    The fn F2 button is to both deactivate and activate your wireless card.

  • 460

    0

    Posted March 24th, 2005 12:00



    @iconsam wrote:

    Have you tried to press the Fn F2 button again to reactivate your network card? If so, make sure that the wireless card isn't set to be disabled by your Quick Settings.

    The fn F2 button is to both deactivate and activate your wireless card.



    Yes, the first thing I did was to press Fn F2 again, assuming that it acted like a toggle switch.


     

  • iconsam

    15 Posts

    460

    0

    Posted March 25th, 2005 15:00

    That's very strange indeed. Have you tried switching over to the Intel/Pro software to connect to the network? Sometimes that helps for me. I switch it and switch it back. Although, I usually stick to Windows to manage my wireless connections.

    After you get a connection up and running, set your router to set a static IP address for you in the dhcp settings. This also helped for me.

  • 460

    0

    Posted March 26th, 2005 13:00



    @iconsam wrote:

    That's very strange indeed. Have you tried switching over to the Intel/Pro software to connect to the network? Sometimes that helps for me. I switch it and switch it back. Although, I usually stick to Windows to manage my wireless connections.

    After you get a connection up and running, set your router to set a static IP address for you in the dhcp settings. This also helped for me.




    Hi, Sam,

    Well, I also tried a system restore, but no luck.  Finally, I uninstalled the wireless connection and reinstalled it.  I'm back up now.

    I didn't know I could use the Intel/Pro software.  I may try that.  Also, I just downloaded the most recent Intel PRO/Wireless 2200BG driver (R89495.exe, released 12/1/04) from the Dell site.  I haven't installed it yet, but will in the near future.

    BMB

  • iconsam

    15 Posts

    460

    0

    Posted March 26th, 2005 16:00

    Cool. You might also want to try to see if there is a firmware update for your router. I've been having some problems connecting with my Intel/Pro wireless so I updated the firmware to my router and things work just fine now.
     
    But before you update the firmware to your router, please make sure you follow the steps very carefully. One pretty important step is never to update your router through your wireless connection. :) Meaning update it with a desktop pc that's connected via ethernet cable.
     
    You can usually find the firware updates from your router's manufacturer's site.
     
    -Sam