UNSOLVED

Miami_Mike

updated

20 years ago

M

Miami_Mike

1 Rookie

•

5 Posts

0

12230

July 20th, 2006 00:00

Can't Connect

I have the Dell 1390 card in my Inspiron 6400.  Upon start up, it tries to connect to Netgear wireless without success.  What do I need to do to make a successful connection?  My PC tries to connect but cannot after several tries it times -out. 
Thanks.
  • emaz

    6 Posts

    231

    0

    Posted July 20th, 2006 09:00

    Hi, I have the "Dell 1390" also. I've installed 2 s.o.(Windows XP & Ubuntu). In Ubuntu, I haven't any problem with the wifi networks; but in WinXP, the wireless card lose the connection each 5-6 min. Then I have to disconnect and connect... It's very strange because only it happens in XP. This card have a lot of problems. I should have chosen the Intel card. Can you help me???
  • dj_cool

    451 Posts

    231

    0

    Posted July 20th, 2006 10:00

    Please do not post two different problems in the same thread.
     
    Regarding the connection issue, try changing the power management settings on the card for maximum performance.
    These are available under the 'Advanced' tab of the card properties in Device Manager.
    Power Management: Disabled
    Throughput Enhancement: Enabled
    Transmit Power: Maximum \ Highest
  • dj_cool

    451 Posts

    231

    0

    Posted July 20th, 2006 10:00

    Normally such issues are related either to the router or to external factors.
     
    Have you tried changing channels on the router?
    Also ensure there is nothing interfering with the wireless connection (Cordless phones at 2.4 GHz, Wireless Cameras at the same frequency, etc).
  • Miami_Mike

    1 Rookie

    •

    5 Posts

    231

    0

    Posted July 21st, 2006 02:00

    I don't have those choices when I open the advanced tab on device manager for the 1390 card in my PC.  I only mentioned one issue, I can't connect to the Netgear wireless network.
  • dj_cool

    451 Posts

    231

    0

    Posted July 21st, 2006 09:00

    Try these options.

    Minimum Power Consumption - Disabled
    AP Compatibility - Broader Compatibility
    Power Save Mode - Disabled
    Rate - Use Best Rate

  • emaz

    6 Posts

    231

    0

    Posted July 21st, 2006 09:00

    These are all the advanced options of the wireless card DELL 1390:
     
    802.11h+d (Strict 11h / Flexible 11h / Flexible 11h+d)
    Enable / Disable radio (Enabled / Disabled)
    To manage wireless configuration (Enabled / Disabled)
    Afterburner (Enabled / Disabled)
    Autopromotion of SSID (Enabled / Disabled)
    Collaboration Bluetooth (Enable / Disable)
    Compatibility of priority VLAN (Enabled / Automatic / Disabled)
    Least consumption of power (Enabled / Disabled)
    Decision of mobility (Optimize bandwidth / Optimize distance / Predetermine)
    Disable in case of wired connection (Enabled / Disabled)
    MAC Adress locally managed (Value / Absentee)
    Diversity of antenna (Automatic / Aux / Main)
    Heading PLCP (Automatic - short or long / Long)
    Ethernet managed by WZC (Enabled / Disabled)
    IBSS allowed (Enabled / Disabled)
    Mode BSS (Predetermine / Only 802.11b)
    Mode of compatibility AP (High performance / Wide compatibility)
    Mode of protection 54g IBSS (Automatic / Disabled)
    Mode IBSS (Mode 802.11b / Mode 802.11g)
    Mode for saving power (Enabled / Disabled / Fast)
    Number of channel IBSS WZC (Value)
    Rate (Value / Use the best rate)
    Technology XPress TM (Enabled / Disabled)
    Tendency of mobility (Aggressive / Conservative / Moderate)
    Threshold of fragmentation (Value)
    Threshold RTS (Value)
    WMM (Enabled / Automatic / Disabled)
     
    PS: Now, I'm using the Software of Dell for managing wireless networks (Panel of Control) instead of software of windows and at the moment the connection continues running.