UNSOLVED

ANSK

updated

19 years ago

A

ANSK

7 Posts

0

6828

January 4th, 2008 22:00

Can I share a printer on my home wireless network?

I have a Dimension E521 with Vista Home Basic, an Inspiron 1721 laptop with Vista Home Premium, a Netgear WGR 614 wireless router, and an HP OfficeJet 5610 printer. The printer is connected to the desktop with a USB cable, the desktop is connected to the router with an Ethernet cable, and the laptop is connected with WiFi to the router, which is connected to the Internet. Internet connections for both computers work just fine. I was hoping that I could share a printer and access it from the laptop via the network but I could not find how. Any suggestions? Or is it a pipe dream? Thanks.
  • volcano11

    2 Intern

    •

    27973 Posts

    345

    0

    Posted January 4th, 2008 23:00

    Yes, you can share the printer on the network.   On the computer to which the printer is connected, designate the printer as a shared printer.   Then install it as a network printer on all other computers on the network.  Make sure any third party firewalls running on these machines are configured to allow local network access.
     
    Steve
  • ANSK

    7 Posts

    345

    0

    Posted January 7th, 2008 20:00

    Steve, I installed the printer on the laptop but then discovered (to my surprise) that my printer (HP All in one 6100) is not equipped for networking. There is hope though: HP has a wireless printing upgrade kit that will connect the printer to the wireless network. Model number is Q6236A#A2L and the cost is $70 if anyone is interested. Thanks for your help, ANSK
  • jbone4scs

    9 Posts

    345

    0

    Posted January 9th, 2008 14:00

    You may want to try the following software to help you share your printer with your network. It worked for me in setting up my Home Network (for file and printer sharing like you are trying to do) and will prevent you from having to purchase additional hardware:
     
     
    Good luck!
  • ANSK

    7 Posts

    345

    0

    Posted January 9th, 2008 15:00

    Thanks