UNSOLVED

pedro5

updated

23 years ago

P

pedro5

5 Posts

0

14909

June 30th, 2003 09:00

8300 and Netgear ga302t

Hello, I wonder if you can help.

I have a dimension 8300 and when I install a Netgear GA302T Network adapter, the machine will not boot, It hangs on the Dell screen, there appears to be no error message in the log. Any help greatly appreciated.

Thanks

Pete

  • DELL-Cody

    2 Intern

    •

    2166 Posts

    468

    0

    Posted June 30th, 2003 19:00

    Try the network card in different PCI slots. Also, try configuring the system with only the video card and your network card installed, and see if boot will continue.
  • pedro5

    5 Posts

    468

    0

    Posted July 1st, 2003 12:00

    Thanks for the reply,

    I took it back to basics and tried all PCI slots to no avail, I have also tried disabling the onboard NIC, I have tried different NICs (also GA302T) with the same result, i.e. won't boot past bios I have also tried it in other 8300s with the same result:( The NICs are known to be good.) I would guess it's something in the bios but there isn't very much to change.

    Any more Ideas?

  • pedro5

    5 Posts

    468

    0

    Posted July 1st, 2003 15:00

    I have also tried: disconnecting all hard drives all CD drives changing graphics cards 1 chip of RAM no keyboard or mouse, and it still won't boot past bios! I have tried an intel 10/100 NIC and it works fine.

    I spoke with Netgear in sunny India, and they just said it is a conflict, contact the manufacturer! glad it came with a 5 year warranty 24X7!

    I think I'm all out of ideas....

  • 468

    0

    Posted October 28th, 2003 11:00

    I have two new 8300s about 6 weeks apart in build.

    Both fail to boot with the GA302T.

    Done the card swapping, disabling built in NIC through BIOS, checked BIOS is up to date etc.

    Nothing - same problem stalls at boot up going through BIOS.

    No help from Netgear either.

    Will this be the calssic, Dell says its Netgear, Netgear say its Dell and meanwhile the punter is stuffed?!

  • 468

    0

    Posted October 28th, 2003 12:00

    The NIC does not have on board jumpers.

    If the machine wont boot with the card in.

    How would you suggest changing IRQ settings?

    Cheers

    M

  • jmwills

    2 Intern

    •

    11984 Posts

    468

    0

    Posted October 28th, 2003 12:00

    This sounds like an IRQ conflict with another device taking the IRQ normally meant for the PCI NIC.

    Did Netgear go thru any of this with you?  From what I have found this NIC can run at Gigabit speed so your BIOS may not support this and take a look at this link (brings up the Broadcom issue):

    http://www.freebsd.org/cgi/man.cgi?query=bge&sektion=4&manpath=FreeBSD+5.1-current

    Message Edited by jmwills on 10-28-2003 09:16 AM

  • pedro5

    5 Posts

    468

    0

    Posted October 28th, 2003 12:00

    Thanks for bringing this up again mmaltby, I asked this question 4 months ago, I have spoken to Dell and Netgear, to date I have had no results. I have learnt that just because I brought 5 8300s and 10 8302Ts it does not mean you get any service! A great shame. Come on DELL give us an ANSWER! These cards work great in the 8250s we have.

    Thanks

    Message Edited by pedro5 on 10-28-2003 08:49 AM

    Message Edited by pedro5 on 10-28-2003 08:50 AM

  • 468

    0

    Posted March 26th, 2004 23:00

    wow. and i thought i was the only one having this problem. i already emailed tech support, but i dont know how long it is going to take to get an answer. Im happy to see that it has nothing to do with my computer.

     

    I have tried everything as well, and it just seems to hang during the post. its been sitting for at least 10 minutes right now, but i know its not going to go anywhere. i really would like to know if there is a work around for this, i want to use gige.

     

    John Barbieri

  • 468

    0

    Posted March 29th, 2004 06:00

    I never bothered speaking to Dell as I couldnt face the multiple transfers to the correct dept, wait, wait, wait, cut off etc... and similarly NetGear. However, I did email both parties about the problem and surprise surprise I have never even had it acknowledged yet alone a resolution.

    Been a while since I last checked Dell's site or NetGear'ss for updates for the machine/NIC so maybe thats worth a go, otherwise you might as well eBay your hardware and get something else - whether thats the Dells or the NetGear NICs doesnt really matter they are both t*****s. Sell it all and buy new kit from a company that is prepared to support its customers...

    Matt