I need to configure two VLANs on a dell 6248 switch. And i need to be able to route between them.
Currently we dont have any VLANs configured on any switch, all switches just have the management VLAN enabled (vlan1)
So VLAN1 subnet is 10.1.21.0/24
VLAN2 subnet will be 192.168.21.0/24
So my original plan was to create VLAN2 on the 6248 switch and setup a static route on the switch will route any traffic from 192.168.21.0 to 10.1.21.0. Both VLANs need to be able to communicate
The only problem with this is that i need to assign the IP address of 10.1.21.4 to VLAN1 on the switch, but of course you can't edit the management VLAN.
So whats the best way to have two VLANs on a switch with full communication between both VLANs as well as communication with the other two switchs that are only running on the management VLAN?
My limited understanding of the subject is that if you want VLAN1 to be routable you have to move the management off of it to another, preferably unused, VLAN. I don't remember the procedure, but I know I saw it posted on these forums at least once.
rakem
7 Posts
240
0
Posted March 7th, 2008 04:00
is that possible???