I want to test the througput of an inter-switch trunk, only two 5448 switches are involved. On each switch five 1GbE switchports (in a LAG) are connected.
I just recently did something similar, which you would need to do on a larger scale.
- I connected 2 old workstations on the first switch, downloaded jperf 2.0.2 (current edition) and set it up in server mode.
-On the 2nd switch I had 2 laptops running jperf in client mode (5 - 10 parallel streams, Buffer Length = 1 MByte, output set to Mbit, and ran it for 10 minutes).
-One laptop connected to jperf server 1, the second laptop connected to jperf server 2.
I then monitored the bandwidth on each port using my network monitoring software.
If you don't have network monitoring software, use cli commands or switch gui!
nick.r
1 Rookie
•
14 Posts
289
1
Posted June 2nd, 2011 15:00
I just recently did something similar, which you would need to do on a larger scale.
- I connected 2 old workstations on the first switch, downloaded jperf 2.0.2 (current edition) and set it up in server mode.
-On the 2nd switch I had 2 laptops running jperf in client mode (5 - 10 parallel streams, Buffer Length = 1 MByte, output set to Mbit, and ran it for 10 minutes).
-One laptop connected to jperf server 1, the second laptop connected to jperf server 2.
I then monitored the bandwidth on each port using my network monitoring software.
If you don't have network monitoring software, use cli commands or switch gui!
/Nick