UNSOLVED

Jacobw

updated

20 years ago

J

Jacobw

14 Posts

0

7814

October 6th, 2006 15:00

Suggested Priority for Spanning Tree

Hi there.
I have a 6024, three 3348's and one 3448.  I have each of the 3xxx switches connected via a 2Gbps LAG Trunk to the 6024.  I am using the Spanning Tree Protocol and I was wondering what optimizied value you would suggest for the root priority and each of the 3xxx switch bridge settings.  I also have the path cost set to 4... is this ok?  Thanks for your help.
 
-Jacob
  • Adam N

    2 Intern

    •

    128 Posts

    95

    0

    Posted October 9th, 2006 09:00

    Hi,
     
    I would suggest that since the PC6024 is naturally the centre of your network, you should make this the spanning-tree root switch.  The switch with the lowest priority will become the root switch so you must ensure that the PC6024 is configured with the lowest priority.  Personally I always like to use a priority of 4096 for my root switch, you can leave all other switches at their default priority of 32768.
     
    Regards