UNSOLVED

pfu

updated

16 years ago

P

pfu

37 Posts

0

5240

May 2nd, 2011 08:00

ports mirroring

I am using the powerconnect 3448 switch.

I am able to setup a mirror port (destination port)  that mirroring activities on other two ports, but I found that the computer at destination port itself would not be able to has its own traffic !   Would not be able to go Internet or even ping other devices within the network?  Tracert is not working.  It seems to me that the mirror port doesn't has it own traffic, it only has the traffic of the ports it mirrored.

The gateway is correct or doesn't matter as the computer could browse the net, ping others, if not using the mirror port.

Is that normal for the mirroring port behave like this? No traffic on it own port ?

Would someone give me some idea ?  Many thanks.

Philip 

:emotion-1:

  • 503

    0

    Posted May 6th, 2011 14:00

    I have the same issue on my PC6248.  I think it's a design 'feature'.

  • nosebreaker

    13 Posts

    503

    1

    Posted May 10th, 2011 20:00

    This is on purpose, I am not aware of a switch that would do as you are describing.  You need another NIC in the PC to monitor the traffic and still have access.  The switch is mirroring all traffic from one port to the other, it isn't listening for any traffic from your PC.  Just stick another NIC in the box and sniff traffic on that :)

  • pfu

    37 Posts

    503

    0

    Posted May 11th, 2011 06:00

    Thank you Nosebreaker for the answer.  Guest there is a design limitation on the ways the mirrow port can do.    Philip