UNSOLVED

LOSTforce10

updated

6 years ago

L

LOSTforce10

1 Rookie

•

15 Posts

0

547

August 23rd, 2020 14:00

MXL and flow control

Looking a best practices I see its recommended to turn on flow control end to end for my storage network.  I am unable to do this on my MXL.  When I attempt it tells me that PFC is already on the interface.  The only way I can see to turn in off it so turn on DCB and set the policy to not use PFC and them apply that to the interface.    

 

How would I turn on flow control or is un-configured PFC the same as FC?

  • Dell-DylanJ

    6 Operator

    •

    2924 Posts

    399

    0

    Posted August 24th, 2020 12:00

    Hello,

     

    You should find the manual of some use with this issue, I'll link to it below.

     

    https://dell.to/31pkVDC

     

    According to the manual. "You cannot enable PFC and link-level flow control at the same time on an interface." The command "no pfc mode on" should turn it off. For details on flow control, I would refer you to page 537.