UNSOLVED

chrisdam

updated

18 years ago

C

chrisdam

1 Message

0

4569

August 27th, 2008 07:00

2748 VLAN

I'm new to this, so please bare with me :-)

 

I've got 2 servers and a gateway all on the same subnet connected to the same 2748. Is it possible to separate the two servers on different VLANS, so they can't contact each other, but both servers can contact the gateway? 

 

 Here's the setup.

 

Server1:

    IP:172.16.2.100

    Subnet:255.255.255.0

    Switch Port:10

 

Server2:

    IP:172.16.2.200

    Subnet:255.255.255.0 

    Switch Port:20

 

Gateway:

    IP:172.6.2.1

    Subnet:255.255.255.0 

    Switch Port:1

 

 

Thank you

 

/Christian

  • DRNO10

    184 Posts

    269

    0

    Posted August 27th, 2008 13:00

    You should look into using Private vlans . Dell has a good white paper on this which would explain it all to you. Although i am pretty sure the 27XX series switches dont support this. Your other option is to introduce a router or routing switch into the mix with multiple vlans.

     

    I hope this helps!

     

    And you mentioned they were all in the same subnet, i think you forgot to put a 1 in front of the 6 for the gateway ip address

    Message Edited by DRNO10 on 08-27-2008 09:29 AM
  • 269

    0

    Posted September 11th, 2008 17:00

    Looks like this is what you want:

    http://www.dell.com/downloads/global/products/pwcnt/en/howto_config_private_vlans.pdf

     

    Although this is not possible with the 27xx switches as mentioned. A way to do it with the switch you have is if the gateway supports VLAN tagging. Then you set the port that connects to the gateway to transmit tagged packets, and hopefully your gateway can be configured to pass the same tags back to the switch. That way both servers can stay on different VLANs and the gateway will be able to speak to both of them.