Hello, I would like to create vlans on a Dell Powerconnect 3448p but have no actual router available to me to do the routing.
Is it possible to just use an extra powerconnect 2724 managed switch that I have laying around that will do the routing for me or do I have to find a way to come up with the money for an actual router?
The 2724 will not do any routing for you, as it's strictly layer 2.
If money is an issue you may be able to cobble together an old PC with a NIC per VLAN and use that as a router. It's neither elegant nor aesthetically pleasing, but it will work.
if you really are tight on cash i can think of 2 things you can do. either get a little cheap router (like a linksys) and you should be able to set it up to route for you (there are GPL codes i have seen around that will let you configure options that you normally can't). you should also be able to buy an older cisco router off ebay (like a 1700 series) that you should be able to get cheap.
Dell-Steve A
48 Posts
319
0
Posted July 10th, 2008 18:00
The 2724 will not do any routing for you, as it's strictly layer 2.
If money is an issue you may be able to cobble together an old PC with a NIC per VLAN and use that as a router. It's neither elegant nor aesthetically pleasing, but it will work.