UNSOLVED

AoA1

updated

17 years ago

A

AoA1

25 Posts

1

1031

August 20th, 2009 00:00

Storage node problem

I inserted all of the Networker license key such as "Networker server with 10 client", "autochanger", "Dedicated Storage node X 6", "Client X 14".

I configured the Networker server and tape library, tested backup is ok. Then i configured 2 storage node (A,B) and test backup is ok too. but when i configured the remain 4 storage node (C, D, E, F), a error is shown "Cannot create device, storage node enabler required".

I did try delete A, B and configure C, D only, and also got error.

Anyone know what is the problem? Thanks!
  • DavidHampson

    2 Intern

    •

    1080 Posts

    356

    0

    Posted August 20th, 2009 06:00

    Your server and storage nodes also take up a Networker client license but I don't think that is the issue here. These storage nodes are "dedicated storage nodes" which means they can only back themselves up which is why the licensing cost is much less... When you create the device for that storage node ensure you check the box for "dedicated storage node" and you should be able to add it.
  • Hormigo

    2 Intern

    •

    131 Posts

    356

    0

    Posted August 20th, 2009 10:00

    Every time I need to configure Dedicated Storage nodes, I do a maneuver:
    1 - Add the licenses of Dedicated Storage Node.
    2 - Add a trial license for Storage Node
    3 - Add and configue a Storage Node.
    4 - In devices this Storage Node that you just added, check the option Dedicated Storage Node.
    5 - Now the Storage Node license is free.
    6 - Repeat step 3 and 4 until all Storage Nodes add.
    7 - Delete the Trial Licenses
  • DavidHampson

    2 Intern

    •

    1080 Posts

    356

    0

    Posted August 21st, 2009 00:00

    If you set the Dedicated Storage Node attribute when the device is created you can avoid having to do this!
  • AoA1

    25 Posts

    356

    0

    Posted September 7th, 2009 21:00

    Thanks all :) Fixed