
UNSOLVED
stinit.def parameters needed for IBM LT03 drives and v7.3.1
Installing some new servers (HP DL585's running Linux - RedHat RHEL 4) connecting through Emulex HBA's and 2Gbit FC links via Cisco switch to upgraded IBM3583 library with four fibre attached IBM LTO3 drives. Can write fine. Just can't read!!!
Any other help with environmental parameters, etc. would be greatly appreciated.
Thanks,
Joe
Any other help with environmental parameters, etc. would be greatly appreciated.
Thanks,
Joe
Responses (1)
Solutions (0)

ble1
6 Operator
•
14354 Posts
•
56186 Points
57
0
Posted July 24th, 2006 17:00