UNSOLVED

skdfsa

updated

17 years ago

S

skdfsa

3 Posts

0

739

August 12th, 2009 09:00

savegrp don't do nothing

Hi folks,

I have a huge issue with a customer environment, when i try to run a savegrp trough the command line, i run the savegrp and inmediately shows the command prompt not doing nothing, nothing appears in the daemon, it is like Networker don't detect that a savegrp has been launched. It could be that nsr binaries are corrupt? i already restart the backup server.

The Backup server is a Solaris.

Regards.

Message was edited by:
skdfsa
  • skdfsa

    3 Posts

    373

    0

    Posted August 12th, 2009 09:00

    connectivity is ok because we try with several clientes, i used the -vvv from the beggining. It is something very weird, as i said i type the savegrp command, i press enter and the command prompt appear again, in the daemon nothing happen. All services are running.
  • DavidHampson

    2 Intern

    •

    1080 Posts

    373

    0

    Posted August 12th, 2009 09:00

    First I would suggest starting it with -vvvv switch and see if you get a little more info; do you see anything occuring on the server? Have you verified connectivity with the client (pings, nslookup).
  • polska14

    79 Posts

    373

    0

    Posted August 12th, 2009 11:00

    What happen if you try from the Networker console?
    Regards
  • Hormigo

    2 Intern

    •

    131 Posts

    373

    0

    Posted August 12th, 2009 12:00

    Have client add in the group?
    in the client run: save -s sever_name /tmp
  • lroberta

    2 Posts

    373

    0

    Posted August 12th, 2009 12:00

    Have you tried running just a probe to see if there is anything wrong with the backup: savegrp -vvvpc client group
  • DavidHampson

    2 Intern

    •

    1080 Posts

    373

    0

    Posted August 13th, 2009 01:00

    "connectivity is ok because we try with several clientes" - could you explain this - are you saying you run a backup of the same client from a different group on the same server and it is okay? It sounds to me like you have not tested connectivity...

    Next thing to try - go to the client and run a backup from there (either from the GUI or save command at the command line)

    Also as suggested run a probe and see if that completes:

    savegrp -p group
  • BGuevara

    1 Rookie

    •

    101 Posts

    373

    0

    Posted August 13th, 2009 01:00

    hi, save command from the clients works.

    I think im going to reinstall networker.

    thanks for your replies.
  • DavidHampson

    2 Intern

    •

    1080 Posts

    373

    0

    Posted August 13th, 2009 02:00

    If save command from the client works you're wasting your time reinstalling. The problem lies somewhere else.
  • skdfsa

    3 Posts

    373

    0

    Posted August 13th, 2009 07:00

    Hi all,

    Thanks for your answers.
    Finally the best option was re-installing NetWorker and recovery the last configuration we had.

    Thanks for all :D