I want to set up Networker 7.3.2 server on a machine which doesn't have any backup device connected. This machine has to take backup of the servers which are connected on the SAN. Tape Library is also available on SAN and is shared between these two servers. But my Networker server machine is not connecting to the SAN through HBA. It's connected in the network through LAN only.
Can I setup the Networker server in the above scenario ? If so, how ? Wud request ur suggestion...Thanks !!
Well, the best thing would be to start with Administration guide then.
In short, server requires to have local device for it's own database backup (can be directed elsewhere via network). As you can't present tape(s) via SAN you can create something called file device and use that as your storage. More details you will find in admin guide.
Thanks for your quick reponse. As I am quite a novice with the product, I would request you to give me some broad installation guidelines, like what component I need to install on the servers, how to set file device for bootstrap/server's index etc. Anyhow I am checking for the networker guides also.
There a lot of ways you can do this, using dedicated storage nodes and DDS to backup the servers on the SAN is one way I like to do, but there are other options that will find in Admin Guide, as said above.
He can't use DDS for server as there is no SAN connection. The only way to get tape would be to directly switch it to server if those two are next to each other which I doubt is the case.
ble1
6 Operator
•
14354 Posts
•
56186 Points
574
1
Posted December 15th, 2006 02:00
In short, server requires to have local device for it's own database backup (can be directed elsewhere via network). As you can't present tape(s) via SAN you can create something called file device and use that as your storage. More details you will find in admin guide.