UNSOLVED

ashxos

updated

18 years ago

A

ashxos

142 Posts

0

1094

March 27th, 2009 09:00

Job is writing on only 1 Drive , rest drives are ideal - Why???

Dear All,

I observed that the one of the JOB is writing on only one drive.

Rest two drives are still iDeal!!!

This perticular job is having Number of Save Sets of 5 Different Servers.

What will be the wrong in configuration.

Networker Version : 7.5
Library : Quantum Scalar i500
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    616

    0

    Posted March 27th, 2009 12:00

    It could be that your target sessions are configured that way (or pool parallelism if you're using it).
  • ashxos

    142 Posts

    616

    0

    Posted March 27th, 2009 20:00

    I havnt selected any drive from Target Device Box.
  • Hari5

    443 Posts

    616

    0

    Posted March 28th, 2009 06:00

    Check your server parallelism on the server properties.
  • ashxos

    142 Posts

    616

    0

    Posted March 30th, 2009 00:00

    It is already set to 50.
  • ashxos

    142 Posts

    616

    0

    Posted March 31st, 2009 04:00

    Thanks. I will go through it...
  • jtgowing

    28 Posts

    616

    1

    Posted March 31st, 2009 04:00

    More on Parallelism.
    Remember that paralellism settings are available at almost every aspect of the Networker Config, Server, Group, Client, Drives (Target Sessions), and Pool.
    You Need to check all these.
    Pools can be configured to be serviced by specific drives, Check that NO drive allocations are made on the Pool options.

    While the job is running check the number of sessions it has open. To use a second, or more Drives the number of active sessions must exceed the number of Target Sessions set on the drive.
    Example
    Job with 10 Sessions, 2 Drives with Target Sessions of 4.
    First 4 sessions will go to drive1, then the next 4 will go to drive 2. Since the Traget sessions of both drives are now full, the last 2 sessions will be spread evenly across the drives, resulting in 5 sessions each.

    The Networker Performance Tuning Guide has detailed info on Parallelism and related settings