How can I make a backup with Networker from a Clariion CX4 LUN passing through
the SAN, and not through the LAN?
Hello, this is my firs post/question here. I´m an storage admin from Argentina, and I have a really annoying boss..
The thing is that we have a SAN, with a lot of hosts, storage and Backups servers connected there. Now, it is possible to take a backup with the Networker (7,6 or newer) through the SAN from any storage LUN presented to a host??. (Storage: CX4-960 and VNX5500)
The order of the normal backup:
Tape<--->Backup Server<--->LAN<--->(Networker Agent) Server "X"<----->SAN<----->Storage<---->LUN with the data of server "X".
What i want to know:
Tape<--->Backup Server<----->SAN<---->Storage<----->LUN with the data of server "X"
(The idea is to put the backup traffic in the SAN)
Is this possible?? Is there one or more solutions for this?
The EMC support tells me about the NMDP client, but thats for NAS, I dont have a NAS...
I was searching in the EMC site, but the options I found does not convince me...
Tape<--->Backup Server<----->SAN<---->Storage<----->LUN with the data of server "X"
(The idea is to put the backup traffic in the SAN)
There is still has to be your server in this picture. You are going to present tape resource to this server directly and it will essentically become a media server. Data will traffic will go directly to tape drives, while metadata will go over IP to your backup server.
install the NetWorker 'storage node' software on your backup clients on which you want to perform SAN-based backup (note: additional licenses will need to be purchased to activate the storage node software)
ensure that these backup clients connect via SAN not only to the source CLARiiON CX4, but also to your backup target (tape, in your example)
The data flow will be from the source CLARiiON through the SAN into your backup client/storage node, and then out through the SAN and into your SAN-attached tape device (example, Data Domain with VTL option).
If you present tape drive to the host where the LUN is, that is also SAN backup. In that case, you would promote that host to storage node (can be dedicated storage node). Another way, if you wish to offload host, is to use proxy backups where copy of LUN is presented to proxy host and you do backup from there. That would offload the application host for example, but would require additional host (proxy) and storage (LUN replica). With NW, you can automate this by using PowerSnap module (though I never used it with CLARiiON, but only with Symmetrix).
Vipin VK
2 Intern
•
812 Posts
861
1
Posted September 10th, 2012 08:00
If you have storage node license you can do it through the SAN. There only metadata will be sent through LAN.
There the data is sent from server to the backup media through SAN, not directly from storage.
This discussion willl get better suggestions from the Networker Support Forum.