Change recyclable to browsable saveset, still unable to restore?
Hi,
I need to recover some folders and files from saveset, when I check the savesets it show "recyclable". I have done scanner on the tape and made the saveset became "browsable".
I have changed the retention time
nsrmm -e -S
When I try to change it to not recyclable, I got error. Why I cannot change it?
nsrmm -o notrecyclable -S
Save set 3801843996 cannot be marked as notrecyclable. Please specify the ssid/cloneid of the particular clone instance.
The path saveset is "browsable" and the index savesets is "recoverable", but I still unable select the "changetime" on that date to recover the files.
We have to do this all of the time, and it's a straightforward process. Before you can restore the index via nsrck, you have to make the appropriate savesets recoverable (not recyclable)..
The 3 commands take less than a minute each, so unless you have a lot of savesets, the longest time to do this, should be the nsrck -L7, as it will have to read a tape (or whatever it is that you use).
What is the current status of the data saveset that you want to recover? If it is in "recoverable" mode go ahead and run the "nsrck -L7 -t Client_name". The nsrck -L7 recoveres the index for that client from the tapes, so ensure that the tape that contains the respective index is in the JB.
In case your savesets are in recycleable mode, you have to convert the savesets to recoverable using "nsrmm -o notrecycleable -S ssid/cloneid". To find the cloneid you can used mminfo - "mminfo -avot -q ssid= -r cloneid".
I would like to know which is the fastest way to recover files from recyclable saveset. I found the scanner part took the very long time to complete.Does scanner needed at the first when the saveset recyclable?
Can I just skip the scanner and use nsrmm directly set the saveset to browsable and not recyclable? Will this work?
noladave
1 Rookie
•
92 Posts
7473
2
Posted October 19th, 2010 11:00
We have to do this all of the time, and it's a straightforward process. Before you can restore the index via nsrck, you have to make the appropriate savesets recoverable (not recyclable)..
The 3 commands take less than a minute each, so unless you have a lot of savesets, the longest time to do this, should be the nsrck -L7, as it will have to read a tape (or whatever it is that you use).
mminfo -q ssid -r cloneid (or equivalent)
nsrmm -S ssid/cloneid -e date
nsrmm -S ssid/cloneid -o notrecyclable
nsrck -L7 -t date client