UNSOLVED

yewkan1

updated

17 years ago

Y

yewkan1

1 Rookie

•

43 Posts

0

897

October 29th, 2009 00:00

backing up client on new hardware

Recently server A crashed and I replace the hardware. However after replacing the hardware, I cannot backup this server A. Legato still still seeing the old server A client's ID. How can I make Legato see this new hardware?
  • HCLBACKUP

    2 Intern

    •

    150 Posts

    399

    0

    Posted October 29th, 2009 08:00

    Is the hostname for old and new hardware is same or different?
  • yewkan1

    1 Rookie

    •

    43 Posts

    399

    0

    Posted October 29th, 2009 08:00

    Existing client crashes and thus replace with new hardware. However, NW is still looking for this "crashed" client. Hostname and IP address has been placed in this new hardware. Appreciate help asap....
  • yewkan1

    1 Rookie

    •

    43 Posts

    399

    0

    Posted October 29th, 2009 08:00

    Backup is not working on this client. Can it be that the backup server is still trying to read from the crashed client?

    Crashed Client name: moses
    IP address: 10.9.8.7
    (nsr services stopped but client is still up)

    New hardware Client name: moses
    IP address: 10.1.2.3
  • yewkan1

    1 Rookie

    •

    43 Posts

    399

    0

    Posted October 29th, 2009 08:00

    the hostname is the same.....
  • HCLBACKUP

    2 Intern

    •

    150 Posts

    399

    0

    Posted October 29th, 2009 08:00

    "NW is looking for the same clientid" what do you mean by this? Is the backup is failing or the indexes are going to the same clientid?
  • HCLBACKUP

    2 Intern

    •

    150 Posts

    399

    0

    Posted October 29th, 2009 09:00

    Check the hostfile entry in backup server. It should be

    10.1.2.3 moses

    or if dns is there then try nslookup moses and check which ip it is returning.
  • Elviz42

    37 Posts

    399

    0

    Posted October 29th, 2009 10:00

    NetWorker uses ths hostfile and DNS for name resolusion. Always check reverselookup in nslookup aswell. If there is the old IP somewhere, networker might use it. You have two clients with the same name in your network, so the local hostfile must have the new entry or the crashed client should be switched off.

    I hope, that you didn´t delete the old client resource in networker? You would have to re-enter the client with the old clientid, because the index relies on the clientid. You can get the old client id with mminfo -q client=moses -r clientid or something like that.

    Message was edited by:
    heikokuhlmann
  • yewkan1

    1 Rookie

    •

    43 Posts

    399

    0

    Posted October 29th, 2009 21:00

    Problem solved. My Legato server is pointing to the old moses client.

    Thanks all for the help. Appreciate greatly.
  • HCLBACKUP

    2 Intern

    •

    150 Posts

    399

    0

    Posted October 30th, 2009 01:00

    Can u tell how it got solved and mark the questions answered apropriately.
  • yewkan1

    1 Rookie

    •

    43 Posts

    55

    0

    Posted November 8th, 2009 23:00

    Host file in Legato server is still pointing to the old IP address. I change the IP address and it works.