UNSOLVED

MichelZ

updated

20 years ago

M

MichelZ

12 Posts

0

756

December 13th, 2006 01:00

B2D Performance issue

Hi guys

We got a strange problem on some of our customer sites:

- NetWorker 7.x (some 7.2.x, some 7.3.x)
- Windows 2003
- DataDomain Disk Storage

We got backup performance (using NetWorker adv. File Device) ranging from 10 to 20 MB/s.
- "Normal" file copy between Client and Backupserver: >40 MB/s
- "Normal" file copy from Backupserver to DataDomain: >40 MB/s
- Customers have tested with other OS (same Hardware): >40 MB/s
- Customers have tested other Backup Softwares (same Hardware): >40 MB/s

So, Problems seems to be related to NetWorker on Windows.

Has anyone got the same issue?
Is there anything to adjust to get more performance?

Regards
Michel
  • amediratta

    2 Intern

    •

    2014 Posts

    343

    0

    Posted December 13th, 2006 07:00

    You should configure the client, group, server & device parallelism to enhance the performance.

    Multiple streams of data at the same time can boost the performance much higher than what could be obtained using a single stream of data.
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    343

    0

    Posted December 13th, 2006 07:00

    Anuj, what you say is correct, BUT:
    - Michel said that copy on that box is faster (no network)
    - network backup is faster too

    In those tests only difference was copy vs. NW. From what I saw they had same target and source.

    What I know from past is that DD box can be slowed down upon periodic check for what needs to be removed from it and depending on size that may take time and may influence speed. Check to see if DD was idle at that time.
  • MichelZ

    12 Posts

    343

    0

    Posted December 13th, 2006 08:00

    Hrvoje, thanks for your reply.

    We have already checked the DD Boxes for such things. We monitored CPU load and so on, but DD is really idle at the time of Backups.

    (If you want, you can have a look at Case #30429, that we filed with Orchestra)

    Thanks & Regards
    Michel
  • ble1

    6 Operator

    •

    14354 Posts

    •

    56186 Points

    343

    0

    Posted December 13th, 2006 08:00

    Make another test then; create file device which does not reside on DD box. I know this could be a problem as you need at least some ATA or even better SATA disk volume for such test, but if you can that would be great. With that you wish to see if issue itself is related to DD box or communication with DD box.

    Also, what is your server version? Since today both 7.2.2 and 7.3.2 have jumbo patches available so you never know...
  • MichelZ

    12 Posts

    343

    0

    Posted December 13th, 2006 08:00

    Hi Anuj

    We already tried this solutions, but it does not work.

    Regards
    Michel
  • MichelZ

    12 Posts

    343

    0

    Posted December 14th, 2006 00:00

    We already tried with some other Devices (NetApp Filer, other Windows Server), but I think this was without NetWorker.

    I will check this solution and let you know.

    We will check the Jumbo Patches, too.

    Thanks a lot!
    Michel