Various issues with 2407 LCD (A03 Mexico) - What to do?
So, I just received my Dell 2407, after ordering on Sunday. Impressively prompt shipping.
However, I have had a few issues, and I'm not certain if I'm missing something important or if my testing methodology is wrong.
The first and most annoying is banding. It is there, most obviously in white to black gradients, but present with all colors sufficiently light. It is not stepping from 8 bit color; that's there as well, and it's both very subtle and very impressive. What is less impressive are the 100 pixel wide (variable sized; thinner as colors get darker) bands. They start at exactly 50 (on the 0-255) scale with all colors, and are apparent all the way down to about 20. Is this typical?
It's really strange because if I zoom in on it in Photoshop and actually look at the two separate colors, 50/50/50 and 51/51/51, there's this huge jump apparent that's much more obvious than any other 1 unit transition. One would think it was remapping colors or something.
The second is that I can't get my GeForce 7800 GT to recognize it as a VGA display. It keeps telling me the signal is out of range. It works fine on my laptop under VGA, so I don't get it. The reason I want to try VGA is it seems to look OK, and it has no banding.
The third is that I can't figure out how to span my desktop across two screens with different resolutions. The Dell is 1900x1200x60. The 17" CRT next to it does not like that resolution. Is there some way to make it some other resolution?
I have an A03 model. I have changed no advanced settings. For reference, there are no dead pixels and uniformity is good, but slightly brighter on the left side. This is all fine. The banding, however, may be a dealbreaker. Is there something I can try to fix that problem (or any of the three) or must I repack this monitor?
Thank you for your help. I did in fact try using D-Sub cable alone. Same problem.
It is, again, somewhat odd this has no issues on my laptop. What's even more odd is that the little $4 Intel integrated driver lets me do split resolutions while my recent-hotness $300 nVidia card does not.
Did you try disconnecting the dvi cable from your dell & only using the dvi/d-sub from your v/card to the d-sub input on your dell? For some reason in dell's manual they state that only one cable to be connected to the monitor. If this fails & because of the other reasons I would look for an exchange or refund.
I will send you a PM (personal mail) very shortly. You can reply to that if you want to.
I assume that you have hooked up the d-sub cable from your v/card to your monitor. All dell monitor drivers used?
If you can't get the vga to work, I don't see why not, & this does not solve your problems then an exchange would be needed. I, personally, could not put up with banding & the uneven backlighting fyi..
I also use adobe suite cs2 (incls. photoshop) & either of these problems I could not handle. How do you know what the output is going to be? WYSIWYG would certainly not apply here.
cheers
ps: btw there are a good number of monitor testing programs (free) listed in the faq s - do a search.
Also things depend on what you use the monitor for & your eye sight;) Not sure about some, but as I said earlier, if you use p/shop you should be fussy & have 20/20 vision.
Message Edited by KevinR100 on 09-27-2006 02:12 PM
I have sent you that private mail (PM) & I hope it helps.
I use 2 monitors as well atm my 24" & a sony 200g crt. I have not tried the split res. (due to the crt) but I can't see why it wouldn't if I used my other 19" viewsonic lcd. instead.
First up I am sure you have enough problems to warrant an exchange/refund & then see or ask.
So in last 2 days we had 2 people post with mexico A03's, one good one bad........
Maybe all the bad ones are made on mondays and fridays and everyone takes wednesday off ?
Or is it DELL mexico has to get new workers for their production every week because most of mexico is imigrating to USA by the millions ?
Anyone else listen to Coast to Coast AM ? or AJ ? :P
"Nice work, thanks for the pictures. Mine look like that.
Yesterday, I received 2 - 2407 A03's, made in Mexico and both are free from banding in desktop mode.
The difference between the A02's and the A03's are like day and night. Don't buy the A02's, wait for A03's to become available in your area.
For Photoshop Pro's and graphics artists use caution in your decision.
If you see banding in an A03, try the other DVI out from your video card. I have 2 DVI outs and one is definitely better than the other."
The great solid black desktop in the Refurb was a DVI out issue glad I caught it now,:) I've exhausted all possibilities and that REFURB is going back, a new A03 is on the way to replace it. They actually thought quoting the 21-day policy would mean something to me. LOL, LOL:):)
2002z06
15 Posts
590
0
Posted September 27th, 2006 02:00