
UNSOLVED
Closed
U4021QW, MacBook Pro M1 Max, not connecting Thunderbolt
Hello,
Since few days ago my U4021QW won't connect anymore to my Mac. Previously it worked well. Nothing changed on Mac side nor on U4021QW. I've tried to change different Thunderbolt cables but the problem persists. HDMI "works" but resolution is terrible and limited to 3840x2160. I'm using latest firmware M2T105 and latest DDPM (that with HDMI cable connected crashes..). Please, someone has advice?
Thank you very much, kind regards
Responses (2)
Solutions (0)
DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
28
0
Posted July 10th, 2023 14:00
Our agents have not received the private service tag from you? Did you click the Get help now and start a chat?
When connected via HDMI cable, also connect the USB upstream cable. Does DDPM then work?
Run this below and retest connecting via the supplied 1.5m/4.9ft USB-C to USB-C cable =
* Turn the MacBook off
* Turn the U4021QW off
* Disconnect every cable (including the power cable) from the rear and side of the U4021QW
* Press the U4021QW power button in for 8 seconds (clears any residual power in the circuits)
* Reconnect the power cable to the U4021QW
* Connect the supplied 1.5m/4.9ft USB-C to USB-C cable from the U4021QW to the MacBook
* Turn the MacBook on, then turn the U4021QW on
DELL-Chris M (old account)
#IWork4Dell

DELL-Chris M
Community Manager
•
56891 Posts
•
232143 Points
59
0
Posted June 19th, 2023 06:00
To receive assistance from DELL-Cares chat support, they need to verify the warranty status and ownership. Click the DELL-Cares username. On the right, click, "Send this user a private message". Provide to them the private U4021QW Service Tag.
If you were previously using the latest U4021QW firmware M2T105 and latest DDPM PRIOR to the issue, then the macOS must have made "some" changes? Suggest you read through the U4021QW threads on the Apple Forum. If no resolution is found, start a new thread thread out there.
DELL-Chris M (old account)
#IWork4Dell