UNSOLVED

surveyor785

updated

21 years ago

0

7029

November 6th, 2005 15:00

Trinitron Monitor

I have a 19" Sony Trinintron Monitor about 3 years old. Recently the screen became blurry. I have connected another monitor to the computer and works fine so I think I can rule out the video card or driver. Dell chat recommended I re-install the driver but linked me to the wrong windows version. The screen became crisp again for about a week then blurry after I turned off the machine. Is this thing toast?
 
Thanks
  • 340

    0

    Posted November 6th, 2005 17:00

    I also tried the monitor on a laptop and had the same problem. I turned off the monitor when transferring it between the two computers. It is also blurry during the self test.
  • koolhonda

    256 Posts

    340

    0

    Posted November 6th, 2005 17:00

    It's doesn't sound good. I'm about order a used triny myself. I guess I'll let you know how it goes. Do you use it for CAD?
  • koolhonda

    256 Posts

    340

    0

    Posted November 6th, 2005 17:00

    Have you tried the monitor on a different computer? When you turned off the computer, did you turn off the monitor as well or did you just leave it in stand by?
  • koolhonda

    256 Posts

    340

    0

    Posted November 6th, 2005 18:00

    You might get lucky and it just needs a new video cable or something, but I wouldn't sink too much $ into it. You can get used ones for under $150.
  • 340

    0

    Posted November 6th, 2005 18:00

    I do use it for cad, I'm back to using an old samsung syncmaster4 plus. Its about 10-12 years old but still nice and crisp.